Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Aqua duplex multimode fibre patch cable with LC and FC connectors, 20m length

Enfain

Enfain OM3 LC-FC Duplex Multimode Fibre Optic Cable 20m Aqua Blue

SKU CH-7FGB-YC2HA

A 20-metre OM3 duplex patch cable with LC and FC connectors for 10-gigabit multimode links at 850 nm

Length 20m

  • Low insertion loss with typical 0.2 dB and maximum 0.3 dB performance
  • High return loss exceeding 38 dB for clean signal reflection
  • Supports 10 Gbps multimode transmission at 850 nm wavelength
  • Durable ceramic ferrules rated for 1000 insertion cycles
  • Flexible 3.0 mm PVC jacket with 330 mm bending radius

Enfain OM3 LC-FC Duplex 20m Cable

This Enfain OM3 LC-FC duplex multimode fibre optic cable is built for high-speed data links in switches, servers and data centres. It uses a 10-gigabit core with ceramic ferrules and a 3.0 mm PVC jacket in aqua blue for easy identification. The 20 metre length suits rack-to-rack or cross-room connections.

Ideal for 10G multimode links, not for single-mode

The cable suits installers who need a ready-made duplex patch cord for 1G, 10G or 40G multimode networks running at 850 nm. It works within an operating range of -20 °C to +60 °C and tolerates a 330 mm bending radius. Buyers who need single-mode fibre, longer reach or a different connector pairing should look at other options.

10G OM3 core with .2 dB typical loss

The OM3 10-gigabit multimode core delivers a typical insertion loss of .2 dB and a maximum of .3 dB, with return loss better than 38 dB. These figures confirm the cable meets the performance window for short-range 10G Ethernet and compatible 40G parallel optics. The ceramic ferrules are rated for 1000 mating cycles.

Öne çıkanlar

  • Low insertion loss with typical 0.2 dB and maximum 0.3 dB performance
  • High return loss exceeding 38 dB for clean signal reflection
  • Supports 10 Gbps multimode transmission at 850 nm wavelength
  • Durable ceramic ferrules rated for 1000 insertion cycles
  • Flexible 3.0 mm PVC jacket with 330 mm bending radius

Teknik özellikler

Bu ürün için henüz yayınlanmış teknik özellik yok.

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

What patch-panel spacing does the 330 mm minimum bend radius require for this 20 m OM3 LC-FC duplex cable?

Allow at least 330 mm of clearance behind the panel so the 3.0 mm jacket never bends tighter than the specified radius.

Which connector end should be seated first when installing this LC-FC duplex patch cord to avoid ferrule damage?

Insert the LC connector until it clicks, then mate the FC end by aligning the key and turning the nut finger-tight.

After how many mating cycles should the ceramic ferrules on this OM3 duplex cable be inspected or replaced?

The ferrules are rated for 1000 insertion and removal cycles; plan inspection or replacement once that count is approached.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.