Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Aqua duplex multimode fibre patch cable with LC and FC connectors, 20m length

Enfain

Enfain OM3 LC-FC Duplex Multimode Fibre Optic Cable 20m Aqua Blue

SKU CH-7FGB-YC2HA

A 20-metre OM3 duplex patch cable with LC and FC connectors for 10-gigabit multimode links at 850 nm

Length 20m

  • Low insertion loss with typical 0.2 dB and maximum 0.3 dB performance
  • High return loss exceeding 38 dB for clean signal reflection
  • Supports 10 Gbps multimode transmission at 850 nm wavelength
  • Durable ceramic ferrules rated for 1000 insertion cycles
  • Flexible 3.0 mm PVC jacket with 330 mm bending radius

Enfain OM3 LC-FC Duplex 20m Cable

This Enfain OM3 LC-FC duplex multimode fibre optic cable is built for high-speed data links in switches, servers and data centres. It uses a 10-gigabit core with ceramic ferrules and a 3.0 mm PVC jacket in aqua blue for easy identification. The 20 metre length suits rack-to-rack or cross-room connections.

Ideal for 10G multimode links, not for single-mode

The cable suits installers who need a ready-made duplex patch cord for 1G, 10G or 40G multimode networks running at 850 nm. It works within an operating range of -20 °C to +60 °C and tolerates a 330 mm bending radius. Buyers who need single-mode fibre, longer reach or a different connector pairing should look at other options.

10G OM3 core with .2 dB typical loss

The OM3 10-gigabit multimode core delivers a typical insertion loss of .2 dB and a maximum of .3 dB, with return loss better than 38 dB. These figures confirm the cable meets the performance window for short-range 10G Ethernet and compatible 40G parallel optics. The ceramic ferrules are rated for 1000 mating cycles.

Fordele

  • Low insertion loss with typical 0.2 dB and maximum 0.3 dB performance
  • High return loss exceeding 38 dB for clean signal reflection
  • Supports 10 Gbps multimode transmission at 850 nm wavelength
  • Durable ceramic ferrules rated for 1000 insertion cycles
  • Flexible 3.0 mm PVC jacket with 330 mm bending radius

Specifikationer

Der er endnu ikke offentliggjort specifikationer for denne vare.

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What patch-panel spacing does the 330 mm minimum bend radius require for this 20 m OM3 LC-FC duplex cable?

Allow at least 330 mm of clearance behind the panel so the 3.0 mm jacket never bends tighter than the specified radius.

Which connector end should be seated first when installing this LC-FC duplex patch cord to avoid ferrule damage?

Insert the LC connector until it clicks, then mate the FC end by aligning the key and turning the nut finger-tight.

After how many mating cycles should the ceramic ferrules on this OM3 duplex cable be inspected or replaced?

The ferrules are rated for 1000 insertion and removal cycles; plan inspection or replacement once that count is approached.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.