Enfain
Enfain OM3 LC-SC Duplex Multimode Fibre Optic Cable 25m Aqua Blue
A 25 m OM3 duplex patch cable with LC and SC connectors, 3.0 mm jacket, 850 nm wavelength, .2 dB typical insertion loss and >38 dB return loss
- Supports 10 GbE links with OM3 10-gigabit core
- Low typical insertion loss of .2 dB preserves signal strength
- Maximum insertion loss of .3 dB ensures reliable performance
- High return loss exceeding 38 dB minimises reflections
- Duplex LC-SC connectors suit switch and server connections
Enfain OM3 LC-SC Duplex 25 m
This aqua-coloured multimode patch cord uses an OM3 10-gigabit core with LC and SC connectors at 850 nm wavelength. The 3.0 mm PVC jacket protects the duplex fibres in data-centre, server and switch environments. Typical insertion loss is 0.2 dB and maximum insertion loss is 0.3 dB, while return loss exceeds 38 dB.
Suits 1 G, 10 G and 40 G links
Installers who need a 25-metre OM3 duplex run with LC-to-SC termination will find the specified loss budget and 330 mm bending radius match short-reach multimode requirements. Buyers who require single-mode fibre, longer distances, or different connector types should look at other cable families.
OM3 10-gigabit core at 850 nm
The core designation and wavelength decide whether this patch cord fits the link budget for 10-gigabit multimode segments. With 1000 mating cycles rated and an operating range of -20 °C to +60 °C, the cable meets the physical demands of repeated patching in cabinet rows.
주요 특징
- Supports 10 GbE links with OM3 10-gigabit core
- Low typical insertion loss of .2 dB preserves signal strength
- Maximum insertion loss of .3 dB ensures reliable performance
- High return loss exceeding 38 dB minimises reflections
- Duplex LC-SC connectors suit switch and server connections
사양
이 상품에 대해 아직 공개된 사양이 없습니다.
이 모델의 다른 버전
같은 라인업에서 5개 더
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
이 상품에 대한 질문
What is the outer diameter of the 3.0 mm jacket so I can check conduit fill?
The cable uses a 3.0 mm PVC jacket, giving an overall diameter of 3.0 mm for conduit or tray planning.
How do I seat the ceramic ferrule connectors without exceeding the 330 mm bend radius?
Route the cable with gradual curves, keep bends wider than 330 mm, then push each LC or SC connector straight in until the latch clicks.
When should I replace the patch cord based on the 1000 mating-cycle rating?
Plan replacement after about 1000 insertions or if insertion loss rises above the 0.3 dB maximum specified for the link.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








