Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Enfain

Enfain OM3 LC-SC Duplex Multimode Fibre Optic Cable 25m Aqua Blue

SKU CH-ETR2-3P1HX

A 25 m OM3 duplex patch cable with LC and SC connectors, 3.0 mm jacket, 850 nm wavelength, .2 dB typical insertion loss and >38 dB return loss

Length 25m

  • Supports 10 GbE links with OM3 10-gigabit core
  • Low typical insertion loss of .2 dB preserves signal strength
  • Maximum insertion loss of .3 dB ensures reliable performance
  • High return loss exceeding 38 dB minimises reflections
  • Duplex LC-SC connectors suit switch and server connections

Enfain OM3 LC-SC Duplex 25 m

This aqua-coloured multimode patch cord uses an OM3 10-gigabit core with LC and SC connectors at 850 nm wavelength. The 3.0 mm PVC jacket protects the duplex fibres in data-centre, server and switch environments. Typical insertion loss is 0.2 dB and maximum insertion loss is 0.3 dB, while return loss exceeds 38 dB.

Suits 1 G, 10 G and 40 G links

Installers who need a 25-metre OM3 duplex run with LC-to-SC termination will find the specified loss budget and 330 mm bending radius match short-reach multimode requirements. Buyers who require single-mode fibre, longer distances, or different connector types should look at other cable families.

OM3 10-gigabit core at 850 nm

The core designation and wavelength decide whether this patch cord fits the link budget for 10-gigabit multimode segments. With 1000 mating cycles rated and an operating range of -20 °C to +60 °C, the cable meets the physical demands of repeated patching in cabinet rows.

Kohokohdat

  • Supports 10 GbE links with OM3 10-gigabit core
  • Low typical insertion loss of .2 dB preserves signal strength
  • Maximum insertion loss of .3 dB ensures reliable performance
  • High return loss exceeding 38 dB minimises reflections
  • Duplex LC-SC connectors suit switch and server connections

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What is the outer diameter of the 3.0 mm jacket so I can check conduit fill?

The cable uses a 3.0 mm PVC jacket, giving an overall diameter of 3.0 mm for conduit or tray planning.

How do I seat the ceramic ferrule connectors without exceeding the 330 mm bend radius?

Route the cable with gradual curves, keep bends wider than 330 mm, then push each LC or SC connector straight in until the latch clicks.

When should I replace the patch cord based on the 1000 mating-cycle rating?

Plan replacement after about 1000 insertions or if insertion loss rises above the 0.3 dB maximum specified for the link.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.