Enfain
Enfain OM3 SC-SC Duplex Multimode Fibre Optic Cable 15m
A 15-metre OM3 multimode duplex patch cord with SC connectors, 3.0 mm jacket, 850 nm wavelength, typical insertion loss of .2 dB and return loss above 38 dB
- Supports 10 Gigabit speeds with OM3 10-gigabit core
- Low insertion loss of .2 dB typical and .3 dB maximum
- High return loss exceeding 38 dB for signal integrity
- Durable 3.0 mm PVC jacket with 330 mm bending radius
- Rated for 1000 insertion cycles and -20 °C to 60 °C operation
Duplex OM3 SC-SC Fibre Cable 15m
This fifteen-metre duplex patch cord uses OM3 multimode fibre with SC connectors on both ends. It is built for 10-gigabit links at 850 nm in data-centre, server and switch environments. The aqua jacket follows the OM3 colour code and measures 3.0 mm in diameter.
Suits 10G uplinks, not single-mode or longer runs
Network engineers extending 10G connections between rack equipment will find the specified insertion loss of 0.2 dB typical and 0.3 dB maximum suitable. Buyers who need single-mode reach, 40G or 100G parallel optics, or runs beyond the OM3 distance envelope should select a different cable type.
0.3 dB maximum insertion loss per connector
The cable guarantees a maximum insertion loss of 0.3 dB and return loss greater than 38 dB. This single figure determines whether the link budget meets the requirements of the specific 10G transceiver pair being deployed.
주요 특징
- Supports 10 Gigabit speeds with OM3 10-gigabit core
- Low insertion loss of .2 dB typical and .3 dB maximum
- High return loss exceeding 38 dB for signal integrity
- Durable 3.0 mm PVC jacket with 330 mm bending radius
- Rated for 1000 insertion cycles and -20 °C to 60 °C operation
사양
이 상품에 대해 아직 공개된 사양이 없습니다.
이 모델의 다른 버전
같은 라인업에서 5개 더
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
이 상품에 대한 질문
Should I choose the 15-metre OM3 duplex or a different length for my rack?
The 15-metre OM3 duplex matches typical rack-to-rack runs; pick a shorter length only if the devices are closer, or a longer one if the path exceeds 15 metres.
What does the 10-gigabit core rating mean when the cable is connected to my switch?
The OM3 10-gigabit core supports 10 GbE at 850 nm with typical insertion loss of 0.2 dB and maximum 0.3 dB, keeping signal quality high for switch-to-server links.
How does the SC-SC duplex interface limit the speeds I can actually run?
The duplex SC connectors carry two fibres for bidirectional traffic and are rated for 1 GbE, 10 GbE and 40 GbE compatible operation over OM3 multimode fibre.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








