Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Square black 80mm case fan with 15mm depth

Fans

Fans AD0824HB-D71Voltage 24V 0.13A 80x80x15mm case fan

SKU CH-MBR9-S9QE7 MPN AD0824HB-D71Voltage

An 80 mm case fan running at 24 V and 3200 RPM with 32 CFM airflow and a precision double ball bearing

  • Runs on standard 24V supply for easy integration
  • Draws only 0.13A to minimise power load
  • Delivers 32CFM airflow for effective component cooling
  • Precision double ball bearing extends operating life
  • Compact 80x80x15mm frame fits tight case spaces

24 V 80 mm axial fan

This 24 V axial fan measures 80 x 80 x 15 mm and delivers 32 CFM at 3200 RPM. It suits industrial equipment, medical devices and embedded systems that require a 24 V DC supply. The two-wire lead provides power only, without speed reporting or PWM control. Buyers who need a 12 V version or a four-wire PWM interface should select a different model.

Simple two-wire mounting

The fan installs with four standard 80 mm mounting holes and connects via a two-wire lead to a 24 V source. Polarity must be observed because the motor is not protected against reverse voltage. No tachometer or PWM signal is present, so the host system cannot monitor speed or adjust it dynamically. Vibration can increase if the mounting surface is uneven or if screws are over-tightened.

Fixed-speed 24 V operation

Running at a constant 3200 RPM, the fan moves 32 CFM and draws 0.13 A from a 24 V rail. Speed cannot be reduced by voltage scaling or PWM because the control electronics are not designed for variable input. Acoustic output and airflow therefore remain constant regardless of thermal load. Systems that require variable-speed cooling or automatic shutdown at low temperature will need an external controller.

Põhijooned

  • Runs on standard 24V supply for easy integration
  • Draws only 0.13A to minimise power load
  • Delivers 32CFM airflow for effective component cooling
  • Precision double ball bearing extends operating life
  • Compact 80x80x15mm frame fits tight case spaces

Tehnilised andmed

Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.

Küsimused selle toote kohta

How can I confirm the fan is running at the intended 3200 RPM after installation?

You can verify the fan is operating correctly by monitoring the RPM reading in your system BIOS or fan-control software; it should report around 3200 RPM when the 24 V supply is applied.

What comes in the box and what extra parts are needed to connect this 2-wire 24 V fan?

The package includes the 80×80×15 mm fan with two lead wires; you will need a 24 V power header or adapter and, if your motherboard uses a 3- or 4-pin connector, a suitable 2-wire to 3/4-pin adapter.

Which version should I choose if I need the 80 mm frame with 32 CFM airflow and double ball bearing?

The AD0824HB-D71 model provides exactly those specifications — 24 V, 0.13 A, 3200 RPM, 32 CFM and precision double ball bearing in the 8015 form factor.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.