FANXIANG
FANXIANG S501Q 512GB PCIe 3.0 x4 NVMe M.2 2280 internal SSD
- Internal Solid Stat…
- Consumer
64,99 $
0.00083322BTC
Laos
FANXIANG
FANXIANG S501Q 1TB M.2 2280 PCIe 3.0 x4 NVMe internal SSD
1 TB M.2 2280 NVMe SSD with PCIe 3.0 x4 reaching 3500 MB/s read and 2500 MB/s write for faster boots and loads
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory ComponentsQLC
- InterfacePCI-Express 3.0 x4
- Up to 3500 MB/s read speeds accelerate boot and load times
- Up to 2500 MB/s write speeds speed up file saves and transfers
- 320 TBW endurance rating supports heavy daily workloads
- 5 million hour MTBF indicates long-term reliability
- Graphite heat-dissipation sticker helps maintain performance under load
1TB NVMe SSD for everyday builds
The Fanxiang S501Q is a 1TB internal drive in the M.2 2280 form factor. It connects through a PCI-Express 3.0 x4 interface and uses 3D NAND QLC memory. The drive targets laptops, desktops and all-in-one systems that have an M.2 slot.
Graphite sticker cooling and slim profile
A graphite heat dissipation sticker is applied to the controller to manage temperatures without a bulky heatsink. The board measures 2.40mm in height and 22.00mm in width, so it fits tight laptop bays and low-profile desktop boards. Installation screws are included in the package.
320TBW endurance and 70°C operating ceiling
Sequential reads reach up to 3500MBps and writes up to 2500MBps thanks to an SLC cache layer. The drive is rated for 320TB written and a 1,500,000-hour MTBF. It operates from 0°C to 70°C and draws no external power beyond the M.2 slot.
Põhijooned
- Up to 3500 MB/s read speeds accelerate boot and load times
- Up to 2500 MB/s write speeds speed up file saves and transfers
- 320 TBW endurance rating supports heavy daily workloads
- 5 million hour MTBF indicates long-term reliability
- Graphite heat-dissipation sticker helps maintain performance under load
Tehnilised andmed
| Brand | FANXIANG |
|---|---|
| Series | S501Q |
| Model | S501Q |
| Part Number | S501Q-1TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | QLC |
| Interface | PCI-Express 3.0 x4 |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 2500 MBps |
| Terabytes Written (TBW) | 320TB |
| MTBF | 1,500,000 hours |
| HeatSink | without HeatSink |
| Features | M.2 2280 NVMe SSD PCIe Gen 3x4 |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -25°C ~ +85°C |
| Height | 2.40mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 8g |
| Package Content | S501Q M.2 NVMe SSD x1, Screwdriver x1, Screw x1 |
Selle mudeli teised versioonid
2 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
FANXIANG
FANXIANG S501Q 2TB PCIe 3.0 x4 NVMe internal SSD
- Internal Solid Stat…
- Consumer
197,99 $
0.00253837BTC
LaosKüsimused selle toote kohta
What does the PCIe 3.0 x4 interface cap the sequential speeds at for this S501Q?
The PCIe 3.0 x4 interface limits the S501Q to 3500 MB/s read and 2500 MB/s write.
What physical slot and clearance does the M.2 2280 form factor need?
It needs an M.2 2280 slot and 2.40 mm height clearance on the motherboard.
How is the drive installed and which step is often missed?
Insert the drive at an angle into the M.2 slot, then secure it with the included screw; the step often missed is fastening that screw.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
