Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
White 420 mm AIO radiator with three 140 mm ARGB fans and matching white CPU block

Geometric Future

Geometric Future Eskimo Pro 420mm liquid cooler white 140mm fan x3 42 LGA 1700 AM5

SKU CH-MFD2-3JEF7

420 mm AIO liquid cooler with three 140 mm ARGB fans, a K6 pump rated at 1.5 L/min and a 55.8 mm copper base for Intel LGA 1700 and AMD AM5 sockets

  • TypeLiquid Cooling System
  • Block CompatibilityIntel® LGA 1700, AMD®AM5
  • Block MaterialCopper
  • Fan Size3 Fan Slots (140 mm)
  • ColorWhite
  • LED ColorARGB

Model Eskimo Pro 420

Fan Size 3 Fan Slots / 140x25mm

Color White

  • Advanced K6 pump delivers 1.5 L/min flow for rapid heat removal
  • 420 mm radiator with three 140 mm Squama 2503 fans provides high-static-pressure airflow
  • 8 mm copper cold plate spreads heat evenly across the CPU
  • ARGB lighting on block and fans creates vibrant white-themed illumination
  • Supports Intel LGA 1700 and AMD AM5 sockets for current platforms

Geometric Future Eskimo Pro 420mm AIO

The Geometric Future Eskimo Pro is a 420mm all-in-one liquid cooler with three 140mm ARGB fans and a copper cold plate. It fits Intel LGA 1700 and AMD AM5 sockets. The unit targets builders who want high-capacity cooling for modern mainstream desktop CPUs in a white finish.

Installation notes and common issues

The cooler arrives with the Squama 2503 fans pre-installed on the 420mm radiator, reducing mounting steps. The K6 pump runs at a fixed 1.5 L/min flow rate. Builders must verify that their case supports a 420mm radiator and that the 55.8 x 55.8mm copper base clears surrounding motherboard components.

Capacity and thermal headroom

The large radiator surface and three high-static-pressure fans give strong heat dissipation for multi-core workloads. The 1.5 L/min pump flow and copper base handle sustained loads from current LGA 1700 and AM5 processors. Extreme overclocking or future high-TDP chips may exceed the thermal limits of this 420mm loop.

Põhijooned

  • Advanced K6 pump delivers 1.5 L/min flow for rapid heat removal
  • 420 mm radiator with three 140 mm Squama 2503 fans provides high-static-pressure airflow
  • 8 mm copper cold plate spreads heat evenly across the CPU
  • ARGB lighting on block and fans creates vibrant white-themed illumination
  • Supports Intel LGA 1700 and AMD AM5 sockets for current platforms

Tehnilised andmed

TypeLiquid Cooling System
Block CompatibilityIntel® LGA 1700, AMD®AM5
Block MaterialCopper
Fan Size3 Fan Slots (140 mm)
ColorWhite
LED ColorARGB

Selle mudeli teised versioonid

4 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

How do I confirm the pump is running at the 1.5 L/min flow rate after installation?

Enter the BIOS or fan-control software and verify the pump header reports an RPM reading; a steady value means the K6 pump is circulating coolant.

What comes in the box and what must I buy separately?

The box contains the 420 mm radiator, water block with copper base, three pre-installed 140 mm Squama 2503 ARGB PWM fans, and mounting hardware for LGA 1700 and AM5; thermal paste is not included.

Which version should I choose for my socket?

This single SKU supports both Intel LGA 1700 and AMD AM5 out of the box, so no separate version selection is required.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.