Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
White 420 mm AIO radiator with three 140 mm ARGB fans and matching white CPU block

Geometric Future

Geometric Future Eskimo Pro 420mm liquid cooler white 140mm fan x3 42 LGA 1700 AM5

SKU CH-MFD2-3JEF7

420 mm AIO liquid cooler with three 140 mm ARGB fans, a K6 pump rated at 1.5 L/min and a 55.8 mm copper base for Intel LGA 1700 and AMD AM5 sockets

  • TypeLiquid Cooling System
  • Block CompatibilityIntel® LGA 1700, AMD®AM5
  • Block MaterialCopper
  • Fan Size3 Fan Slots (140 mm)
  • ColorWhite
  • LED ColorARGB

Model Eskimo Pro 420

Fan Size 3 Fan Slots / 140x25mm

Color White

  • Advanced K6 pump delivers 1.5 L/min flow for rapid heat removal
  • 420 mm radiator with three 140 mm Squama 2503 fans provides high-static-pressure airflow
  • 8 mm copper cold plate spreads heat evenly across the CPU
  • ARGB lighting on block and fans creates vibrant white-themed illumination
  • Supports Intel LGA 1700 and AMD AM5 sockets for current platforms

Geometric Future Eskimo Pro 420mm AIO

The Geometric Future Eskimo Pro is a 420mm all-in-one liquid cooler with three 140mm ARGB fans and a copper cold plate. It fits Intel LGA 1700 and AMD AM5 sockets. The unit targets builders who want high-capacity cooling for modern mainstream desktop CPUs in a white finish.

Installation notes and common issues

The cooler arrives with the Squama 2503 fans pre-installed on the 420mm radiator, reducing mounting steps. The K6 pump runs at a fixed 1.5 L/min flow rate. Builders must verify that their case supports a 420mm radiator and that the 55.8 x 55.8mm copper base clears surrounding motherboard components.

Capacity and thermal headroom

The large radiator surface and three high-static-pressure fans give strong heat dissipation for multi-core workloads. The 1.5 L/min pump flow and copper base handle sustained loads from current LGA 1700 and AM5 processors. Extreme overclocking or future high-TDP chips may exceed the thermal limits of this 420mm loop.

Puncte forte

  • Advanced K6 pump delivers 1.5 L/min flow for rapid heat removal
  • 420 mm radiator with three 140 mm Squama 2503 fans provides high-static-pressure airflow
  • 8 mm copper cold plate spreads heat evenly across the CPU
  • ARGB lighting on block and fans creates vibrant white-themed illumination
  • Supports Intel LGA 1700 and AMD AM5 sockets for current platforms

Specificații

TypeLiquid Cooling System
Block CompatibilityIntel® LGA 1700, AMD®AM5
Block MaterialCopper
Fan Size3 Fan Slots (140 mm)
ColorWhite
LED ColorARGB

Alte versiuni ale acestui model

4 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I confirm the pump is running at the 1.5 L/min flow rate after installation?

Enter the BIOS or fan-control software and verify the pump header reports an RPM reading; a steady value means the K6 pump is circulating coolant.

What comes in the box and what must I buy separately?

The box contains the 420 mm radiator, water block with copper base, three pre-installed 140 mm Squama 2503 ARGB PWM fans, and mounting hardware for LGA 1700 and AM5; thermal paste is not included.

Which version should I choose for my socket?

This single SKU supports both Intel LGA 1700 and AMD AM5 out of the box, so no separate version selection is required.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.