Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Rectangular beige mining rig with four front fans and Ethernet port

Goldshell

Goldshell KD MAX 40.2TH/s 3350W mining hardware

SKU CH-E17T-8J257

Kadena ASIC miner delivering 40.2 Th/s at 3350 W with four fans rated at 80 dB

  • 2 Th/s ±5% hashrate for high KDA mining output
  • 3350 W power draw with 185–285 V input range
  • Compact 200 × 264 × 290 mm frame fits dense racks
  • 80 dB noise from four fans suits dedicated facilities
  • Operates from −35 °C to 95 % humidity for harsh environments

Goldshell KD MAX 40.2 TH/s Miner

The Goldshell KD MAX is a dedicated crypto mining machine built for Kadena algorithm work. It delivers a rated hashrate of 40.2 TH/s with a tolerance of ±5 percent. The unit ships in new condition and was released in June 2022. It connects to the network through a wired Ethernet interface.

Thermal noise and power profile

Four integrated fans move air through the chassis to manage heat during continuous operation. The manufacturer specifies a noise level of 80 dB under load. Power draw is rated at 3350 W and the power supply accepts an input voltage range of 185 to 285 V. The operating temperature window spans 0 to 35 °C with a relative humidity tolerance of 5 to 95 percent.

Physical footprint and deployment

The enclosure measures 200 x 264 x 290 mm and weighs 8.1 kg, allowing it to fit on standard shelving or rack trays. No additional accessories or proprietary software packages are listed in the supplier data. The Ethernet port provides the sole management and pool connection path.

Põhijooned

  • 2 Th/s ±5% hashrate for high KDA mining output
  • 3350 W power draw with 185–285 V input range
  • Compact 200 × 264 × 290 mm frame fits dense racks
  • 80 dB noise from four fans suits dedicated facilities
  • Operates from −35 °C to 95 % humidity for harsh environments

Tehnilised andmed

Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.

Küsimused selle toote kohta

How do I install the Goldshell KD MAX 40.2TH/s 3350W miner and what step is commonly missed?

Place the unit on a stable surface with clearance around its 200 x 264 x 290mm frame, connect an Ethernet cable for network access, then supply 185-285V power to reach 3350W. The step often missed is verifying the PDU and circuit can sustain the full 3350W draw continuously before powering on.

What maintenance or replacement will the Goldshell KD MAX 40.2TH/s 3350W miner need later?

The four fans are the primary wear items; at 80dB noise they move significant air and bearings degrade over time. Plan to clean dust from the intake and exhaust paths every few months and replace any fan that develops vibration or reduced airflow to keep temperatures within the -35°C to 95% humidity operating envelope.

What limit appears first when the Goldshell KD MAX 40.2TH/s 3350W miner runs under sustained load?

The 3350W power ceiling and the 80dB cooling capacity set the practical ceiling. If inlet air approaches the upper ambient range or the four fans cannot exhaust heat fast enough, the unit will throttle hashrate below 40.2 TH/s to stay within thermal limits, making cooling headroom the first bottleneck.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.