Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
White rectangular Goldshell Mini-DOGE miner with front grille and side vents

Goldshell

Goldshell Mini-DOGE 185 MH/s without PSU mining hardware

SKU CH-TS0V-3CQ2T

A compact Dogecoin and Litecoin miner delivering 185 MH/s at 233 W with 35 dB noise and Ethernet or Wi-Fi connectivity

  • ColorWhite
  • 185 MH/s hashrate for DOGE and LTC mining
  • 233 W wall power with a tolerance of ±5 %
  • 35 dB noise level keeps home use quiet
  • Ethernet and Wi-Fi connectivity for flexible setup
  • Compact 175 × 150 × 84 mm design weighs 2 kg

Home Dogecoin and Litecoin Miner

The Goldshell Mini-DOGE is a compact ASIC miner built for Scrypt-based coins such as Dogecoin and Litecoin. It delivers a nominal hashrate of 185 MH/s with a tolerance of roughly five percent. The unit draws about 233 W at the wall and operates at a quiet 35 dB, making it suitable for residential spaces.

Step Up From GPU Or Entry ASIC

Moving from a graphics card or a lower-output ASIC to this device brings a dedicated Scrypt engine that runs continuously without driver overhead. The efficiency jump is worth it when electricity cost per kilowatt-hour makes GPU mining unprofitable and a purpose-built 185 MH/s platform can pay back its hardware cost within a realistic horizon.

Desktop Form Factor With Dual Network Options

Measuring 175 mm by 150 mm by 84 mm and weighing 2 kg, the miner sits on a shelf or desk and connects through either Ethernet or Wi-Fi. An external 80 PLUS Gold supply rated above 600 W with 12 V 25 A output is required, freeing the chassis from an internal PSU and simplifying cooling in a home environment.

Põhijooned

  • 185 MH/s hashrate for DOGE and LTC mining
  • 233 W wall power with a tolerance of ±5 %
  • 35 dB noise level keeps home use quiet
  • Ethernet and Wi-Fi connectivity for flexible setup
  • Compact 175 × 150 × 84 mm design weighs 2 kg

Tehnilised andmed

BrandGoldshell
ModelMini-DOGE
ColorWhite

Küsimused selle toote kohta

What clearance does the 175 mm by 150 mm by 84 mm Mini-DOGE need for airflow?

Allow at least 50 mm of free space around the 175 mm by 150 mm by 84 mm chassis so the low-noise fans can keep the 35 dB rating and stay within the 0 to 35 °C operating range.

Which step is often missed when connecting the miner via Ethernet or Wi-Fi?

After wiring the Ethernet cable or selecting the Wi-Fi network in the web UI, you must save the pool settings and reboot; the miner will not start hashing at 185 MH/s until the reboot completes.

When should the custom Goldshell PSU be replaced to maintain the 233 W draw?

Plan to swap the power supply after roughly two years of continuous 233 W operation or if the 12 V rail can no longer deliver a steady 25 A under load.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.