Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White rectangular Goldshell Mini-DOGE miner with front grille and side vents

Goldshell

Goldshell Mini-DOGE 185 MH/s without PSU mining hardware

SKU CH-TS0V-3CQ2T

A compact Dogecoin and Litecoin miner delivering 185 MH/s at 233 W with 35 dB noise and Ethernet or Wi-Fi connectivity

  • ColorWhite
  • 185 MH/s hashrate for DOGE and LTC mining
  • 233 W wall power with a tolerance of ±5 %
  • 35 dB noise level keeps home use quiet
  • Ethernet and Wi-Fi connectivity for flexible setup
  • Compact 175 × 150 × 84 mm design weighs 2 kg

Home Dogecoin and Litecoin Miner

The Goldshell Mini-DOGE is a compact ASIC miner built for Scrypt-based coins such as Dogecoin and Litecoin. It delivers a nominal hashrate of 185 MH/s with a tolerance of roughly five percent. The unit draws about 233 W at the wall and operates at a quiet 35 dB, making it suitable for residential spaces.

Step Up From GPU Or Entry ASIC

Moving from a graphics card or a lower-output ASIC to this device brings a dedicated Scrypt engine that runs continuously without driver overhead. The efficiency jump is worth it when electricity cost per kilowatt-hour makes GPU mining unprofitable and a purpose-built 185 MH/s platform can pay back its hardware cost within a realistic horizon.

Desktop Form Factor With Dual Network Options

Measuring 175 mm by 150 mm by 84 mm and weighing 2 kg, the miner sits on a shelf or desk and connects through either Ethernet or Wi-Fi. An external 80 PLUS Gold supply rated above 600 W with 12 V 25 A output is required, freeing the chassis from an internal PSU and simplifying cooling in a home environment.

Kohokohdat

  • 185 MH/s hashrate for DOGE and LTC mining
  • 233 W wall power with a tolerance of ±5 %
  • 35 dB noise level keeps home use quiet
  • Ethernet and Wi-Fi connectivity for flexible setup
  • Compact 175 × 150 × 84 mm design weighs 2 kg

Tekniset tiedot

BrandGoldshell
ModelMini-DOGE
ColorWhite

Kysymyksiä tästä tuotteesta

What clearance does the 175 mm by 150 mm by 84 mm Mini-DOGE need for airflow?

Allow at least 50 mm of free space around the 175 mm by 150 mm by 84 mm chassis so the low-noise fans can keep the 35 dB rating and stay within the 0 to 35 °C operating range.

Which step is often missed when connecting the miner via Ethernet or Wi-Fi?

After wiring the Ethernet cable or selecting the Wi-Fi network in the web UI, you must save the pool settings and reboot; the miner will not start hashing at 185 MH/s until the reboot completes.

When should the custom Goldshell PSU be replaced to maintain the 233 W draw?

Plan to swap the power supply after roughly two years of continuous 233 W operation or if the 12 V rail can no longer deliver a steady 25 A under load.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.