Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Silver rectangular 3.5 inch SATA hard drive with circuit board visible

HPE

HPE 628059-B21 3TB 7.2K rpm 3.5" SATA internal hard drive

SKU CH-E164-W2S5M

A 3.5-inch internal hard drive with 3 TB capacity, 7200 rpm spindle speed and a SATA 3.0Gb/s interface

  • InterfaceSATA 3.0Gb/s
  • Capacity3TB
  • NAND Flash Memory TypeSLC
  • Form Factor3.5"
  • 3 TB capacity stores large media libraries
  • 7,200 rpm spindle speed delivers responsive data access
  • SATA 3.0 Gb/s interface connects to standard desktop ports
  • 5-inch form factor fits typical internal drive bays
  • New condition provides full manufacturer-rated reliability

Capacity and interface

This HPE Midline drive provides three terabytes of storage on a SATA 3.0Gb/s interface. It fits a standard 3.5-inch internal bay and spins at 7200 rpm. The SLC NAND flash memory type supports the drive's firmware and caching operations.

Sustained workload behaviour

The 7200 rpm spindle speed delivers consistent throughput for sequential reads and writes during extended sessions. SATA 3.0Gb/s bandwidth sets the ceiling for sustained transfer rates. The Midline classification indicates design for nearline storage workloads rather than heavy transactional databases.

Installation checklist

Verify that the host system has a free 3.5-inch drive bay and a SATA data cable. Confirm the power supply includes a SATA power connector for the drive. Ensure the motherboard or controller supports SATA 3.0Gb/s operation for full performance.

Põhijooned

  • 3 TB capacity stores large media libraries
  • 7,200 rpm spindle speed delivers responsive data access
  • SATA 3.0 Gb/s interface connects to standard desktop ports
  • 5-inch form factor fits typical internal drive bays
  • New condition provides full manufacturer-rated reliability

Tehnilised andmed

BrandHPE
InterfaceSATA 3.0Gb/s
Capacity3TB
NAND Flash Memory TypeSLC
Form Factor3.5"

Küsimused selle toote kohta

How much power and heat does the 7200 rpm 3.5" SATA drive produce during all-day operation?

The 7200 rpm spindle speed and 3.5" form factor mean typical mid-range power draw and heat; ensure your case airflow handles a 3 lb drive running continuously.

Which cables and bay does the SATA/300 interface need to work in my system?

You need a standard SATA data cable, a SATA power connector from your PSU, and an available 3.5" internal drive bay measuring at least 5.8" high, 8.7" wide and 11.6" deep.

Will the SATA/300 interface run at full speed on an older motherboard with only SATA 1.5Gb/s ports?

The drive's SATA 3.0Gb/s interface is backward compatible; it will operate at the slower 1.5Gb/s rate on older ports without any configuration changes.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.