Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Silver rectangular 3.5 inch SATA hard drive with circuit board visible

HPE

HPE 628059-B21 3TB 7.2K rpm 3.5" SATA internal hard drive

SKU CH-E164-W2S5M

A 3.5-inch internal hard drive with 3 TB capacity, 7200 rpm spindle speed and a SATA 3.0Gb/s interface

  • InterfaceSATA 3.0Gb/s
  • Capacity3TB
  • NAND Flash Memory TypeSLC
  • Form Factor3.5"
  • 3 TB capacity stores large media libraries
  • 7,200 rpm spindle speed delivers responsive data access
  • SATA 3.0 Gb/s interface connects to standard desktop ports
  • 5-inch form factor fits typical internal drive bays
  • New condition provides full manufacturer-rated reliability

Capacity and interface

This HPE Midline drive provides three terabytes of storage on a SATA 3.0Gb/s interface. It fits a standard 3.5-inch internal bay and spins at 7200 rpm. The SLC NAND flash memory type supports the drive's firmware and caching operations.

Sustained workload behaviour

The 7200 rpm spindle speed delivers consistent throughput for sequential reads and writes during extended sessions. SATA 3.0Gb/s bandwidth sets the ceiling for sustained transfer rates. The Midline classification indicates design for nearline storage workloads rather than heavy transactional databases.

Installation checklist

Verify that the host system has a free 3.5-inch drive bay and a SATA data cable. Confirm the power supply includes a SATA power connector for the drive. Ensure the motherboard or controller supports SATA 3.0Gb/s operation for full performance.

Points forts

  • 3 TB capacity stores large media libraries
  • 7,200 rpm spindle speed delivers responsive data access
  • SATA 3.0 Gb/s interface connects to standard desktop ports
  • 5-inch form factor fits typical internal drive bays
  • New condition provides full manufacturer-rated reliability

Caractéristiques

BrandHPE
InterfaceSATA 3.0Gb/s
Capacity3TB
NAND Flash Memory TypeSLC
Form Factor3.5"

Questions sur cet article

How much power and heat does the 7200 rpm 3.5" SATA drive produce during all-day operation?

The 7200 rpm spindle speed and 3.5" form factor mean typical mid-range power draw and heat; ensure your case airflow handles a 3 lb drive running continuously.

Which cables and bay does the SATA/300 interface need to work in my system?

You need a standard SATA data cable, a SATA power connector from your PSU, and an available 3.5" internal drive bay measuring at least 5.8" high, 8.7" wide and 11.6" deep.

Will the SATA/300 interface run at full speed on an older motherboard with only SATA 1.5Gb/s ports?

The drive's SATA 3.0Gb/s interface is backward compatible; it will operate at the slower 1.5Gb/s rate on older ports without any configuration changes.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.