Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
White mid-tower case with panoramic tempered glass panels and red yellow Gundam Wing accents

HYTE

HYTE CS-HYTE-Y70-GWING Gundam Wing PC case

SKU CH-BS8W-2E81F MPN CS-HYTE-Y70-GWING

Dual-chamber mid-tower ATX case with panoramic tempered glass, vertical GPU mounting via included PCIe 4.0 riser, and support for 360 mm side and top radiators plus cold-floor GPU cooling

  • Motherboard CompatibilityMicro ATX / ATX / ITX / E-ATX
  • ColorWhite, Red, Yellow
  • Case MaterialABS / Steel / Tempered Glass
  • TypeDual Chamber Mid-Tower ATX Case
  • Front Ports2 x Front USB 3.2 Gen 1 Type-A 1 x Front USB 3.2 Gen 2 Type
  • Internal 3.5" Drive Bays2
  • Officially licensed Gundam Wing Zero design celebrates 30 years of anime heritage
  • Dual-chamber layout separates components for cleaner airflow and easier cable routing
  • Vertical GPU mounting with included PCIe 4.0 x16 riser supports cards up to 422 mm long
  • Side radiator mount accepts 360 mm units up to 125 mm thick for high-capacity liquid cooling
  • Cold-floor zone fits three 120 mm or two 140 mm fans up to 32 mm thick for direct GPU airflow

Wing Gundam Zero Edition

The HYTE Y70 Gundam Wing is a limited-edition dual-chamber mid-tower case clad in official Wing Gundam Zero colourways to mark 30 years of the anime series. It supports Micro-ATX, ATX, ITX and E-ATX motherboards and includes a PCIe 4.0 x16 riser cable with a colour-matched milky canopy for vertical graphics-card mounting.

Vertical GPU and cooling upgrades

The chassis moves the graphics card to a dedicated vertical zone with four expansion slots, replacing the traditional horizontal layout found in standard mid-towers. Builders who want uninterrupted visual flow through the panoramic tempered-glass panels and a painless GPU install will benefit; those needing more than four vertical slots or a horizontal mount should look elsewhere.

Sustained-load thermal behaviour

Under prolonged load the side bracket accepts a 360 mm radiator up to 125 mm thick while the adjustable top bracket fits another 360 mm radiator up to 68 mm thick. The cold-floor zone directs fresh air from three 120 mm or two 140 mm fans up to 32 mm thick straight into the GPU, keeping temperatures stable during extended sessions.

Põhijooned

  • Officially licensed Gundam Wing Zero design celebrates 30 years of anime heritage
  • Dual-chamber layout separates components for cleaner airflow and easier cable routing
  • Vertical GPU mounting with included PCIe 4.0 x16 riser supports cards up to 422 mm long
  • Side radiator mount accepts 360 mm units up to 125 mm thick for high-capacity liquid cooling
  • Cold-floor zone fits three 120 mm or two 140 mm fans up to 32 mm thick for direct GPU airflow

Tehnilised andmed

Motherboard CompatibilityMicro ATX / ATX / ITX / E-ATX
ColorWhite, Red, Yellow
Case MaterialABS / Steel / Tempered Glass
TypeDual Chamber Mid-Tower ATX Case
Front Ports2 x Front USB 3.2 Gen 1 Type-A
1 x Front USB 3.2 Gen 2 Type C
1x Combo Audio/Mic Jack
BrandHYTE
ModelCS-HYTE-Y70-GWING
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays4
Expansion Slots4 Vertical + 7 Half-Height
Max GPU Length422 mm
Max CPU Cooler Height180 mm
Max PSU Length235 mm
Dimensions470mm x 320mm x 470mm? (18.5 x 12.6 x 18.5 Inches) (L x W x H)
Weight10.61kg
Tarnekaal12.56 kg
Pakendi mõõtmed570 × 552 × 405 mm

Küsimused selle toote kohta

Will a 422 mm graphics card and the included PCIe 4.0 riser fit in the four vertical slots?

Yes, the case supports GPUs up to 422 mm and ships with a PCIe 4.0 x16 riser cable and colour-matched canopy designed for the four vertical expansion slots.

How do I mount the motherboard and route cables in the dual-chamber layout?

Install the motherboard in the main chamber using standard ATX standoffs, then run all power and data cables through the rear cut-outs into the second chamber where tool-less panels and Velcro straps keep routing tidy.

What fan or radiator sizes can I add later for CPU and GPU cooling?

The side accepts a 360 mm radiator up to 125 mm thick, the top bracket takes a 360 mm radiator up to 68 mm thick, and the floor fits three 120 mm or two 140 mm fans up to 32 mm thick.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.