Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
White mid-tower case with panoramic tempered glass panels and red yellow Gundam Wing accents

HYTE

HYTE CS-HYTE-Y70-GWING Gundam Wing PC case

SKU CH-BS8W-2E81F MPN CS-HYTE-Y70-GWING

Dual-chamber mid-tower ATX case with panoramic tempered glass, vertical GPU mounting via included PCIe 4.0 riser, and support for 360 mm side and top radiators plus cold-floor GPU cooling

  • Motherboard CompatibilityMicro ATX / ATX / ITX / E-ATX
  • ColorWhite, Red, Yellow
  • Case MaterialABS / Steel / Tempered Glass
  • TypeDual Chamber Mid-Tower ATX Case
  • Front Ports2 x Front USB 3.2 Gen 1 Type-A 1 x Front USB 3.2 Gen 2 Type
  • Internal 3.5" Drive Bays2
  • Officially licensed Gundam Wing Zero design celebrates 30 years of anime heritage
  • Dual-chamber layout separates components for cleaner airflow and easier cable routing
  • Vertical GPU mounting with included PCIe 4.0 x16 riser supports cards up to 422 mm long
  • Side radiator mount accepts 360 mm units up to 125 mm thick for high-capacity liquid cooling
  • Cold-floor zone fits three 120 mm or two 140 mm fans up to 32 mm thick for direct GPU airflow

Wing Gundam Zero Edition

The HYTE Y70 Gundam Wing is a limited-edition dual-chamber mid-tower case clad in official Wing Gundam Zero colourways to mark 30 years of the anime series. It supports Micro-ATX, ATX, ITX and E-ATX motherboards and includes a PCIe 4.0 x16 riser cable with a colour-matched milky canopy for vertical graphics-card mounting.

Vertical GPU and cooling upgrades

The chassis moves the graphics card to a dedicated vertical zone with four expansion slots, replacing the traditional horizontal layout found in standard mid-towers. Builders who want uninterrupted visual flow through the panoramic tempered-glass panels and a painless GPU install will benefit; those needing more than four vertical slots or a horizontal mount should look elsewhere.

Sustained-load thermal behaviour

Under prolonged load the side bracket accepts a 360 mm radiator up to 125 mm thick while the adjustable top bracket fits another 360 mm radiator up to 68 mm thick. The cold-floor zone directs fresh air from three 120 mm or two 140 mm fans up to 32 mm thick straight into the GPU, keeping temperatures stable during extended sessions.

Istaknuto

  • Officially licensed Gundam Wing Zero design celebrates 30 years of anime heritage
  • Dual-chamber layout separates components for cleaner airflow and easier cable routing
  • Vertical GPU mounting with included PCIe 4.0 x16 riser supports cards up to 422 mm long
  • Side radiator mount accepts 360 mm units up to 125 mm thick for high-capacity liquid cooling
  • Cold-floor zone fits three 120 mm or two 140 mm fans up to 32 mm thick for direct GPU airflow

Specifikacije

Motherboard CompatibilityMicro ATX / ATX / ITX / E-ATX
ColorWhite, Red, Yellow
Case MaterialABS / Steel / Tempered Glass
TypeDual Chamber Mid-Tower ATX Case
Front Ports2 x Front USB 3.2 Gen 1 Type-A
1 x Front USB 3.2 Gen 2 Type C
1x Combo Audio/Mic Jack
BrandHYTE
ModelCS-HYTE-Y70-GWING
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays4
Expansion Slots4 Vertical + 7 Half-Height
Max GPU Length422 mm
Max CPU Cooler Height180 mm
Max PSU Length235 mm
Dimensions470mm x 320mm x 470mm? (18.5 x 12.6 x 18.5 Inches) (L x W x H)
Weight10.61kg
Težina pošiljke12.56 kg
Dimenzije pakiranja570 × 552 × 405 mm

Pitanja o ovom artiklu

Will a 422 mm graphics card and the included PCIe 4.0 riser fit in the four vertical slots?

Yes, the case supports GPUs up to 422 mm and ships with a PCIe 4.0 x16 riser cable and colour-matched canopy designed for the four vertical expansion slots.

How do I mount the motherboard and route cables in the dual-chamber layout?

Install the motherboard in the main chamber using standard ATX standoffs, then run all power and data cables through the rear cut-outs into the second chamber where tool-less panels and Velcro straps keep routing tidy.

What fan or radiator sizes can I add later for CPU and GPU cooling?

The side accepts a 360 mm radiator up to 125 mm thick, the top bracket takes a 360 mm radiator up to 68 mm thick, and the floor fits three 120 mm or two 140 mm fans up to 32 mm thick.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.