Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Black plastic bracket converting a 2.5 inch SATA drive to a 3.5 inch bay

ICY DOCK

ICY DOCK MB882SP-1S-3B 2.5" to 3.5" SATA SSD accessory

SKU CH-66ZF-PN4EJ MPN MB882SP-1S-3B

Converts 2.5" SATA or SAS drives to a 3.5" bay with open airflow and anti-vibration springs

  • ColorBlack
  • Conversion Tray1 x 2.5" Drive to 3.5" Bay
  • Mobile Rack Drives Support1 x 2.5" Drive to 3.5" Bay
  • Mobile Rack InterfaceSATA I/II/III/SAS
  • Protection CaseSingle Drive
  • Compatible Products2.5"

Model Economic

Option 1 x 3.5in

  • Converts 2.5" SATA drives to 3.5" bays
  • Open-air design with perforated vents for airflow
  • Anti-vibration springs and stabilising mechanism protect drives
  • Tool-less installation supports 7mm to 15mm heights
  • One-piece lightweight construction fits universal mounting holes

Drive-bay converter

The ICY DOCK MB882SP-1S-3B converts a 2.5" SATA or SAS drive into a 3.5" form factor so it can be installed in any standard desktop drive bay. It accepts drive heights of 7mm, 9.5mm, 12.5mm and 15mm, covering both SSDs and notebook hard drives. The single-piece black bracket is designed for consumers and builders who need to add 2.5" storage to a 3.5" slot.

Build integration

The converter uses a 7-pin SATA interface that also supports single-channel SAS when the host controller provides it, requiring no extra cables or adapters beyond the standard SATA data and power connections. Tool-less drive installation lets you secure the 2.5" device inside the bracket quickly, while universal mounting holes align with existing 3.5" bay screws. The open-air frame leaves the drive fully exposed to case airflow instead of trapping heat inside a closed tray.

Sustained operation

Perforated vents and an open-air structure promote continuous airflow around the mounted drive, helping temperatures stay stable during long write sessions or RAID rebuilds. Anti-vibration springs absorb minor shocks while a stabilising mechanism keeps the drive firmly seated, reducing the risk of connection loss under vibration. The lightweight one-piece construction adds negligible mass to the chassis and does not obstruct neighbouring bays or cables.

Põhijooned

  • Converts 2.5" SATA drives to 3.5" bays
  • Open-air design with perforated vents for airflow
  • Anti-vibration springs and stabilising mechanism protect drives
  • Tool-less installation supports 7mm to 15mm heights
  • One-piece lightweight construction fits universal mounting holes

Tehnilised andmed

BrandICY DOCK
ModelMB882SP-1S-3B
ColorBlack
Conversion Tray1 x 2.5" Drive to 3.5" Bay
Mobile Rack Drives Support1 x 2.5" Drive to 3.5" Bay
Mobile Rack InterfaceSATA I/II/III/SAS
Protection CaseSingle Drive
Compatible Products2.5"
SpecificationsCompatible Drive Type:
2.5" SATA 1.5 / 3 / 6 Gb/s HDD/SSD
2.5" SAS HDD/SSD (SAS host required)
Compatible Drive Heights:
7mm, 9.5mm, 12.5mm & 15mm
Device Interface:
7 pin SATA (Support SAS Single Channal)
Power Input:
15 pin SATA power connector
Device Fit:
3.5" SATA drive bay
Transfer Rate:
Up to 6 Gb/sec. (depending on hard drive speed)
Material:
Plastic
Dimension (L x W x H):
101.6 x 25.4 x 146.6mm
Weight:
91.5g
Package Contentst :
Device, User manual, Screws
Tarnekaal0.13 kg
Pakendi mõõtmed160 × 112 × 38 mm

Selle mudeli teised versioonid

3 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

What is the maximum drive height this bracket accepts for a 2.5" SATA SSD?

The bracket fits 2.5" SATA drives up to 15 mm tall, covering 7 mm, 9.5 mm, 12.5 mm and 15 mm heights.

Does the open-air frame and perforated vents keep a drive cool during continuous operation?

The open-air design and perforated vents provide all-around airflow so the drive stays cool even when running all day.

Which host interface is required if I install a 2.5" SAS SSD in this converter?

A SAS host connection is required; the converter passes the SAS signal through its 7-pin SATA interface.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.