Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black plastic bracket converting a 2.5 inch SATA drive to a 3.5 inch bay

ICY DOCK

ICY DOCK MB882SP-1S-3B 2.5" to 3.5" SATA SSD accessory

SKU CH-66ZF-PN4EJ MPN MB882SP-1S-3B

Converts 2.5" SATA or SAS drives to a 3.5" bay with open airflow and anti-vibration springs

  • ColorBlack
  • Conversion Tray1 x 2.5" Drive to 3.5" Bay
  • Mobile Rack Drives Support1 x 2.5" Drive to 3.5" Bay
  • Mobile Rack InterfaceSATA I/II/III/SAS
  • Protection CaseSingle Drive
  • Compatible Products2.5"

Model Economic

Option 1 x 3.5in

  • Converts 2.5" SATA drives to 3.5" bays
  • Open-air design with perforated vents for airflow
  • Anti-vibration springs and stabilising mechanism protect drives
  • Tool-less installation supports 7mm to 15mm heights
  • One-piece lightweight construction fits universal mounting holes

Drive-bay converter

The ICY DOCK MB882SP-1S-3B converts a 2.5" SATA or SAS drive into a 3.5" form factor so it can be installed in any standard desktop drive bay. It accepts drive heights of 7mm, 9.5mm, 12.5mm and 15mm, covering both SSDs and notebook hard drives. The single-piece black bracket is designed for consumers and builders who need to add 2.5" storage to a 3.5" slot.

Build integration

The converter uses a 7-pin SATA interface that also supports single-channel SAS when the host controller provides it, requiring no extra cables or adapters beyond the standard SATA data and power connections. Tool-less drive installation lets you secure the 2.5" device inside the bracket quickly, while universal mounting holes align with existing 3.5" bay screws. The open-air frame leaves the drive fully exposed to case airflow instead of trapping heat inside a closed tray.

Sustained operation

Perforated vents and an open-air structure promote continuous airflow around the mounted drive, helping temperatures stay stable during long write sessions or RAID rebuilds. Anti-vibration springs absorb minor shocks while a stabilising mechanism keeps the drive firmly seated, reducing the risk of connection loss under vibration. The lightweight one-piece construction adds negligible mass to the chassis and does not obstruct neighbouring bays or cables.

Pontos fortes

  • Converts 2.5" SATA drives to 3.5" bays
  • Open-air design with perforated vents for airflow
  • Anti-vibration springs and stabilising mechanism protect drives
  • Tool-less installation supports 7mm to 15mm heights
  • One-piece lightweight construction fits universal mounting holes

Especificações

BrandICY DOCK
ModelMB882SP-1S-3B
ColorBlack
Conversion Tray1 x 2.5" Drive to 3.5" Bay
Mobile Rack Drives Support1 x 2.5" Drive to 3.5" Bay
Mobile Rack InterfaceSATA I/II/III/SAS
Protection CaseSingle Drive
Compatible Products2.5"
SpecificationsCompatible Drive Type:
2.5" SATA 1.5 / 3 / 6 Gb/s HDD/SSD
2.5" SAS HDD/SSD (SAS host required)
Compatible Drive Heights:
7mm, 9.5mm, 12.5mm & 15mm
Device Interface:
7 pin SATA (Support SAS Single Channal)
Power Input:
15 pin SATA power connector
Device Fit:
3.5" SATA drive bay
Transfer Rate:
Up to 6 Gb/sec. (depending on hard drive speed)
Material:
Plastic
Dimension (L x W x H):
101.6 x 25.4 x 146.6mm
Weight:
91.5g
Package Contentst :
Device, User manual, Screws
Peso de envio0.13 kg
Dimensões da embalagem160 × 112 × 38 mm

Outras versões deste modelo

Mais 3 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

What is the maximum drive height this bracket accepts for a 2.5" SATA SSD?

The bracket fits 2.5" SATA drives up to 15 mm tall, covering 7 mm, 9.5 mm, 12.5 mm and 15 mm heights.

Does the open-air frame and perforated vents keep a drive cool during continuous operation?

The open-air design and perforated vents provide all-around airflow so the drive stays cool even when running all day.

Which host interface is required if I install a 2.5" SAS SSD in this converter?

A SAS host connection is required; the converter passes the SAS signal through its 7-pin SATA interface.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.