Intel
Intel D3-S4510 3.84TB 2.5" SATA Enterprise SSD SSDSC2KB038T801
A 3.84 TB 2.5-inch SATA enterprise SSD with 560 MB/s reads, 510 MB/s writes, 1.4 DWPD endurance and hardware AES 256-bit encryption
- Form Factor2.5"
- Capacity3.84TB
- Memory Components3D NAND TLC
- InterfaceSATA III
- Max Sequential ReadUp to 560 MBps
- Max Sequential WriteUp to 510 MBps
Läbikriipsutatud versioonid on olemas, kuid neid pole siin saadaval.
- 84 TB capacity supports read-intensive workloads with 560 MB/s sequential read speed
- 4 DWPD endurance delivers 13.1 PBW lifetime writes for consistent reliability
- AES 256-bit hardware encryption protects data at rest without performance penalty
- Enhanced power-loss data protection prevents data corruption during unexpected outages
- 2 million hours MTBF and 36 µs read latency ensure predictable server uptime
Enterprise SATA SSD with 3.84TB capacity
The Intel D3-S4510 is a 2.5-inch enterprise solid-state drive built for read-intensive server workloads. It connects through a SATA III 6Gb/s interface and uses 64-layer 3D NAND TLC memory. Sequential reads reach up to 560 MBps while sequential writes reach up to 510 MBps.
Suits read-heavy arrays.
This drive fits legacy SATA infrastructures that need higher capacity and lower power draw than traditional hard disks. It delivers 1.4 DWPD endurance and 13.1 PBW lifetime writes. Systems that demand heavier sustained write throughput or a different interface should consider other options.
1.4 DWPD endurance rating decides fit
The endurance figure of 1.4 drive writes per day determines whether the SSD matches your workload profile. With 3.84TB capacity this yields 13.1 PBW of total bytes written. Match that number against your application’s daily write volume to confirm suitability.
Põhijooned
- 84 TB capacity supports read-intensive workloads with 560 MB/s sequential read speed
- 4 DWPD endurance delivers 13.1 PBW lifetime writes for consistent reliability
- AES 256-bit hardware encryption protects data at rest without performance penalty
- Enhanced power-loss data protection prevents data corruption during unexpected outages
- 2 million hours MTBF and 36 µs read latency ensure predictable server uptime
Tehnilised andmed
| Brand | Intel |
|---|---|
| Series | D3-S4510 |
| Model | SSDSC2KB038T801 |
| Part Number | SSDSC2KB038T801 |
| Form Factor | 2.5" |
| Capacity | 3.84TB |
| Memory Components | 3D NAND TLC |
| Interface | SATA III |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 510 MBps |
| 4KB Random Read | Up to 97,000 IOPS |
| 4KB Random Write | Up to 32,000 IOPS |
| Read Latency | 36 µs |
| Write Latency | 37 µs |
| Endurance | 1.4 DWPD |
| MTBF | 2,000,000 hours |
| Features | Endurance Rating (Lifetime Writes): 13.1 PBW Enhanced Power Loss Data Protection: Yes Hardware Encryption: AES 256 bit Temperature Monitoring and Logging: Yes End-to-End Data Protection: Yes Compatible with existing SATA setups for an easy storage upgrade Up to 6x lower power and lower cooling requirements than 2.5-inch HDDs 3.2x more data in the same amount of space Up to 4.2x lower annualized failure rates (AFR) for fewer drive replacements Up to 300x more IOPS/TB than HDDs |
| Power Consumption (Idle) | 1.1W |
| Power Consumption (Active) | 3.6W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000G / 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS Non-Operating: 3.13 GRMS |
| Height | 7.00mm |
| Width | 4.750 |
| Weight | 0.26 |
| Tarnekaal | 0.45 kg |
| Pakendi mõõtmed | 146 × 118 × 41 mm |
Selle mudeli teised versioonid
4 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
Intel
Intel D3-S4510 SSDSC2KB480G801 480GB 2.5" SATA enterprise SSD
- 2.5"
- 480GB
185,99 $
0.00240493BTC
Laos
Intel
Intel SSDSC2KB960G801 D3-S4510 960GB 2.5" Sata enterprise SSD
- 2.5"
- 960GB
188,99 $
0.00244372BTC
Laos
Intel
Intel SSDSC2KB019T801 D3-S4510 1.92TB 2.5" SATA enterprise SSD
- 2.5"
- 1.92TB
411,99 $
0.0053272BTC
LaosKüsimused selle toote kohta
Should I pick the 3.84TB D3-S4510 or a smaller capacity from the same series?
The 3.84TB model delivers 1.4 DWPD endurance and 13.1 PBW lifetime writes, so it suits read-intensive workloads that need high capacity without sacrificing durability.
What does the 560 MB/s sequential read figure mean once the drive is installed in a server?
In a SATA III 6Gb/s backplane the drive can sustain up to 560 MB/s reads and 510 MB/s writes, with 97,000 random read IOPS and 32,000 random write IOPS at 36 µs and 37 µs latency respectively.
The drive uses a SATA III 6Gb/s interface — what does that cap in practice?
The SATA III link limits throughput to 6 Gb/s, so sequential speeds top out at the rated 560 MB/s read and 510 MB/s write while the drive draws 3.6 W active and 1.1 W idle.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
