Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular 2.5 inch silver metal enterprise SSD with label showing Intel D3-S4510 3.84TB

Intel

Intel D3-S4510 3.84TB 2.5" SATA Enterprise SSD SSDSC2KB038T801

SKU CH-GKXW-QRG25 MPN SSDSC2KB038T801

A 3.84 TB 2.5-inch SATA enterprise SSD with 560 MB/s reads, 510 MB/s writes, 1.4 DWPD endurance and hardware AES 256-bit encryption

  • Form Factor2.5"
  • Capacity3.84TB
  • Memory Components3D NAND TLC
  • InterfaceSATA III
  • Max Sequential ReadUp to 560 MBps
  • Max Sequential WriteUp to 510 MBps

Options 3.84TB

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • 84 TB capacity supports read-intensive workloads with 560 MB/s sequential read speed
  • 4 DWPD endurance delivers 13.1 PBW lifetime writes for consistent reliability
  • AES 256-bit hardware encryption protects data at rest without performance penalty
  • Enhanced power-loss data protection prevents data corruption during unexpected outages
  • 2 million hours MTBF and 36 µs read latency ensure predictable server uptime

Enterprise SATA SSD with 3.84TB capacity

The Intel D3-S4510 is a 2.5-inch enterprise solid-state drive built for read-intensive server workloads. It connects through a SATA III 6Gb/s interface and uses 64-layer 3D NAND TLC memory. Sequential reads reach up to 560 MBps while sequential writes reach up to 510 MBps.

Suits read-heavy arrays.

This drive fits legacy SATA infrastructures that need higher capacity and lower power draw than traditional hard disks. It delivers 1.4 DWPD endurance and 13.1 PBW lifetime writes. Systems that demand heavier sustained write throughput or a different interface should consider other options.

1.4 DWPD endurance rating decides fit

The endurance figure of 1.4 drive writes per day determines whether the SSD matches your workload profile. With 3.84TB capacity this yields 13.1 PBW of total bytes written. Match that number against your application’s daily write volume to confirm suitability.

Přednosti

  • 84 TB capacity supports read-intensive workloads with 560 MB/s sequential read speed
  • 4 DWPD endurance delivers 13.1 PBW lifetime writes for consistent reliability
  • AES 256-bit hardware encryption protects data at rest without performance penalty
  • Enhanced power-loss data protection prevents data corruption during unexpected outages
  • 2 million hours MTBF and 36 µs read latency ensure predictable server uptime

Specifikace

BrandIntel
SeriesD3-S4510
ModelSSDSC2KB038T801
Part NumberSSDSC2KB038T801
Form Factor2.5"
Capacity3.84TB
Memory Components3D NAND TLC
InterfaceSATA III
Max Sequential ReadUp to 560 MBps
Max Sequential WriteUp to 510 MBps
4KB Random ReadUp to 97,000 IOPS
4KB Random WriteUp to 32,000 IOPS
Read Latency36 µs
Write Latency37 µs
Endurance1.4 DWPD
MTBF2,000,000 hours
FeaturesEndurance Rating (Lifetime Writes): 13.1 PBW
Enhanced Power Loss Data Protection: Yes
Hardware Encryption: AES 256 bit
Temperature Monitoring and Logging: Yes
End-to-End Data Protection: Yes
Compatible with existing SATA setups for an easy storage upgrade
Up to 6x lower power and lower cooling requirements than 2.5-inch HDDs
3.2x more data in the same amount of space
Up to 4.2x lower annualized failure rates (AFR) for fewer drive replacements
Up to 300x more IOPS/TB than HDDs
Power Consumption (Idle)1.1W
Power Consumption (Active)3.6W
Operating Temperature0°C ~ +70°C
Max Shock Resistance1000G / 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS
Non-Operating: 3.13 GRMS
Height7.00mm
Width4.750
Weight0.26
Přepravní hmotnost0.45 kg
Rozměry balení146 × 118 × 41 mm

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I pick the 3.84TB D3-S4510 or a smaller capacity from the same series?

The 3.84TB model delivers 1.4 DWPD endurance and 13.1 PBW lifetime writes, so it suits read-intensive workloads that need high capacity without sacrificing durability.

What does the 560 MB/s sequential read figure mean once the drive is installed in a server?

In a SATA III 6Gb/s backplane the drive can sustain up to 560 MB/s reads and 510 MB/s writes, with 97,000 random read IOPS and 32,000 random write IOPS at 36 µs and 37 µs latency respectively.

The drive uses a SATA III 6Gb/s interface — what does that cap in practice?

The SATA III link limits throughput to 6 Gb/s, so sequential speeds top out at the rated 560 MB/s read and 510 MB/s write while the drive draws 3.6 W active and 1.1 W idle.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.