Intel
Intel SSDPE21K750GA01 P4800x 750GB 2.5" PCIe 3.0 x4 NVMe internal SSD
Enterprise 2.5" NVMe SSD delivering 750 GB capacity with 2500 MB/s read and 2200 MB/s write over PCIe 3.0 x4
- Device TypeInternal / External Solid State Drive (SSD)
- Used ForEnterprise
- Form Factor2.5"
- Capacity750GB
- InterfacePCI-Express 3.0 x4
- ProtocolNVMe
- Enterprise-grade storage with 750 GB capacity
- PCIe 3.0 x4 interface delivers up to 2500 MBps read speed
- NVMe protocol enables up to 2200 MBps write throughput
- 5" form factor fits standard enterprise drive bays
- Weighs 0.92 kg for dense server deployments
Enterprise PCIe 3.0 x4 NVMe SSD
The Intel P4800x is a 750 GB internal solid-state drive built for enterprise workloads. It uses a 2.5 inch form factor with a PCI Express 3.0 x4 interface and the NVMe protocol. Sequential reads reach up to 2500 MBps and writes up to 2200 MBps.
Suited for high-endurance server
This drive targets environments that demand consistent low-latency performance under heavy write cycles. It is not intended for typical consumer desktops or laptops that rely on mainstream consumer-grade endurance and power profiles. Buyers without enterprise-grade thermal management or U.2 backplane support should evaluate compatibility carefully.
PCIe 3.0 x4 NVMe interface decides fit
The drive requires a system or adapter that provides a native PCI Express 3.0 x4 electrical connection and NVMe driver support. Without that specific interface the SSD cannot operate at its rated 2500 MBps read and 2200 MBps write speeds. Verify the host platform supplies the exact link width and protocol before purchase.
Põhijooned
- Enterprise-grade storage with 750 GB capacity
- PCIe 3.0 x4 interface delivers up to 2500 MBps read speed
- NVMe protocol enables up to 2200 MBps write throughput
- 5" form factor fits standard enterprise drive bays
- Weighs 0.92 kg for dense server deployments
Tehnilised andmed
| Brand | Intel |
|---|---|
| Device Type | Internal / External Solid State Drive (SSD) |
| Used For | Enterprise |
| Form Factor | 2.5" |
| Capacity | 750GB |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe |
| Max Sequential Read | Up to 2500 MBps |
| Max Sequential Write | Up to 2200 MBps |
| Height | 1.000 |
| Width | 4.500 |
| Weight | 0.92 |
| Tarnekaal | 0.20 kg |
| Pakendi mõõtmed | 145 × 115 × 15 mm |
Küsimused selle toote kohta
Does this 2.5" drive fit a standard U.2 / 2.5" PCIe drive bay?
Yes, the 2.5" form factor with a PCIe 3.0 x4 interface is designed for U.2 or 2.5" PCIe drive bays found in enterprise servers and workstations.
What throughput can I expect for sequential workloads?
Sequential reads reach up to 2500 MBps and sequential writes up to 2200 MBps over the PCIe 3.0 x4 link.
Is this drive intended for enterprise environments?
The product is classified for enterprise use, offering 750GB capacity and NVMe protocol over PCIe 3.0 x4 for high-endurance applications.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
