SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Intel
Enterprise 2.5" NVMe SSD delivering 750 GB capacity with 2500 MB/s read and 2200 MB/s write over PCIe 3.0 x4
The Intel P4800x is a 750 GB internal solid-state drive built for enterprise workloads. It uses a 2.5 inch form factor with a PCI Express 3.0 x4 interface and the NVMe protocol. Sequential reads reach up to 2500 MBps and writes up to 2200 MBps.
This drive targets environments that demand consistent low-latency performance under heavy write cycles. It is not intended for typical consumer desktops or laptops that rely on mainstream consumer-grade endurance and power profiles. Buyers without enterprise-grade thermal management or U.2 backplane support should evaluate compatibility carefully.
The drive requires a system or adapter that provides a native PCI Express 3.0 x4 electrical connection and NVMe driver support. Without that specific interface the SSD cannot operate at its rated 2500 MBps read and 2200 MBps write speeds. Verify the host platform supplies the exact link width and protocol before purchase.
| Brand | Intel |
|---|---|
| Device Type | Internal / External Solid State Drive (SSD) |
| Used For | Enterprise |
| Form Factor | 2.5" |
| Capacity | 750GB |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe |
| Max Sequential Read | Up to 2500 MBps |
| Max Sequential Write | Up to 2200 MBps |
| Height | 1.000 |
| Width | 4.500 |
| Weight | 0.92 |
| Prepravná hmotnosť | 0.20 kg |
| Rozmery balenia | 145 × 115 × 15 mm |
Yes, the 2.5" form factor with a PCIe 3.0 x4 interface is designed for U.2 or 2.5" PCIe drive bays found in enterprise servers and workstations.
Sequential reads reach up to 2500 MBps and sequential writes up to 2200 MBps over the PCIe 3.0 x4 link.
The product is classified for enterprise use, offering 750GB capacity and NVMe protocol over PCIe 3.0 x4 for high-endurance applications.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?