Jansicotek
Jansicotek SATA/IDE to USB 3.0 Adapter with 12V 2A Power
Connects 2.5" and 3.5" SATA or IDE drives to USB 3.0, supports three drives at once with included 12V power
- ColorBlack
- Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0
- Access three drives at once for simultaneous file transfer
- Achieve up to 5 Gbps transfer speed with USB 3.0 interface
- Includes 12V 2A power adapter for reliable drive operation
- Works with Windows, Mac OS and Linux systems
Universal Drive Connectivity
This adapter connects 2.5 and 3.5 inch SATA or IDE hard drives and SSDs to a USB port. It suits technicians and home users who need to recover, clone or archive data from bare drives without installing them internally. The cable provides SATA II and both 40pin and 44pin IDE connectors for broad legacy support.
Plug-and-Play Expansion
The device draws power from an included 12V 2A supply, freeing the host USB port from delivering spin-up current for 3.5 inch mechanisms. Up to three drives can be attached at once, allowing direct file transfer between them. It works with Windows, Mac OS and Linux without driver installation.
Cool Silent Operation
No onboard fan means the adapter adds no acoustic noise to the workspace. Power consumption stays limited to the external supply rating, so the host system’s thermal budget is unaffected. An LED indicator shows activity status while the drives run at their own native temperatures.
Põhijooned
- Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0
- Access three drives at once for simultaneous file transfer
- Achieve up to 5 Gbps transfer speed with USB 3.0 interface
- Includes 12V 2A power adapter for reliable drive operation
- Works with Windows, Mac OS and Linux systems
Tehnilised andmed
| Color | Black |
|---|
Küsimused selle toote kohta
What is the maximum drive capacity this adapter can handle before it stops recognising the disk?
The adapter supports drives up to 6 TB, so any larger disk will not be recognised.
Does the 12 V 2 A power supply keep the unit cool and quiet during continuous operation?
The 12 V 2 A adapter powers up to three drives at once; the unit has no fan and runs silently, with only the LED showing activity.
Which drive connectors must my existing drives have for this adapter to work?
Your drives need either a SATA connector, a 40-pin IDE connector, or a 44-pin IDE connector to plug into this adapter.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
