Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black USB 3.0 adapter with SATA and dual IDE connectors, 12V power supply included

Jansicotek

Jansicotek SATA/IDE to USB 3.0 Adapter with 12V 2A Power

SKU CH-K2H7-ERZX6

Connects 2.5" and 3.5" SATA or IDE drives to USB 3.0, supports three drives at once with included 12V power

  • ColorBlack
  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0
  • Access three drives at once for simultaneous file transfer
  • Achieve up to 5 Gbps transfer speed with USB 3.0 interface
  • Includes 12V 2A power adapter for reliable drive operation
  • Works with Windows, Mac OS and Linux systems

Universal Drive Connectivity

This adapter connects 2.5 and 3.5 inch SATA or IDE hard drives and SSDs to a USB port. It suits technicians and home users who need to recover, clone or archive data from bare drives without installing them internally. The cable provides SATA II and both 40pin and 44pin IDE connectors for broad legacy support.

Plug-and-Play Expansion

The device draws power from an included 12V 2A supply, freeing the host USB port from delivering spin-up current for 3.5 inch mechanisms. Up to three drives can be attached at once, allowing direct file transfer between them. It works with Windows, Mac OS and Linux without driver installation.

Cool Silent Operation

No onboard fan means the adapter adds no acoustic noise to the workspace. Power consumption stays limited to the external supply rating, so the host system’s thermal budget is unaffected. An LED indicator shows activity status while the drives run at their own native temperatures.

Kohokohdat

  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0
  • Access three drives at once for simultaneous file transfer
  • Achieve up to 5 Gbps transfer speed with USB 3.0 interface
  • Includes 12V 2A power adapter for reliable drive operation
  • Works with Windows, Mac OS and Linux systems

Tekniset tiedot

ColorBlack

Kysymyksiä tästä tuotteesta

What is the maximum drive capacity this adapter can handle before it stops recognising the disk?

The adapter supports drives up to 6 TB, so any larger disk will not be recognised.

Does the 12 V 2 A power supply keep the unit cool and quiet during continuous operation?

The 12 V 2 A adapter powers up to three drives at once; the unit has no fan and runs silently, with only the LED showing activity.

Which drive connectors must my existing drives have for this adapter to work?

Your drives need either a SATA connector, a 40-pin IDE connector, or a 44-pin IDE connector to plug into this adapter.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.