Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Three black 120mm case fans with infinity mirror lighting and daisy-chain connectors shown together

Jungle Leopard

Jungle Leopard Interstellar V2 120mm Case Fan Black Triple Pack

SKU CH-C6ET-48YT8

Triple pack of 120 mm hydraulic-bearing fans with daisy-chain ARGB infinity-mirror lighting, controller included, 68 CFM at under 32 dB(A)

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color Black-Forward

  • Triple pack cools 360 mm radiators with 68 CFM each
  • Hydraulic bearing runs 900-1850 RPM under 32 dB(A)
  • Daisy-chain slide-in pins cut cable count to one per cluster
  • Infinity-mirror side lighting adds depth without extra wiring
  • Eight damping pads suppress resonance to 29 dBA

Triple 120 mm ARGB fan kit

This triple pack supplies three 120 mm case fans with integrated infinity-mirror lighting and a daisy-chain interlock system. Each unit runs on a 4-pin connector and is designed for standard case mounts or a 360 mm liquid-cooling radiator.

Hydraulic bearing and nylon-mesh cables

Hydraulic bearings keep the 900-1850 RPM range smooth while eight damping pads limit resonance to 29 dBA. The nylon-mesh sleeved cables resist snagging, and the slide-in pin-to-pin locking lets a whole cluster run from a single lead for a cleaner interior.

Upgrade from single-cable or non-ARGB fans

Builders replacing basic 120 mm fans gain addressable lighting, lower cable count and 68 CFM airflow at 2.4 mmH₂O pressure without exceeding 32 dBA. The jump is worthwhile when a case or 360 mm cooler needs three matched fans that install in seconds rather than minutes.

Põhijooned

  • Triple pack cools 360 mm radiators with 68 CFM each
  • Hydraulic bearing runs 900-1850 RPM under 32 dB(A)
  • Daisy-chain slide-in pins cut cable count to one per cluster
  • Infinity-mirror side lighting adds depth without extra wiring
  • Eight damping pads suppress resonance to 29 dBA

Tehnilised andmed

BrandJungle Leopard
SeriesInterstellar
ModelInterstellar V2
Part NumberInterstellar V2
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM900-1850RPM
Air Flow68CFM
Air Pressure2.4mmH20
Noise Level<32dB(A)
Power Connector4 Pin
ColorBlack
Dimensions120×120×25mm 4.72*4.72*0.98in

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

What does the 4-pin PWM connector on the Jungle Leopard Interstellar V2 actually control?

The 4-pin connector enables pulse-width modulation so the motherboard or supplied controller can vary speed precisely between 900 and 1850 RPM while reporting real-time tachometer feedback.

Will the 25 mm thick fans with their 8 vibration pads fit a standard 120 mm mounting grid?

Yes. Each fan measures 120 × 120 × 25 mm, matching the industry 120 mm hole pattern, and the eight corner pads add only a fraction of a millimetre without interfering with screws.

How do I connect the three fans in the daisy-chain without creating a short?

Align the slide-in pin-to-pin interlock on each fan, press firmly until the latch clicks, then run the single combined lead to the controller or motherboard header — reversing the orientation bends pins and breaks the chain.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.