Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Three black 120mm case fans with infinity mirror lighting and daisy-chain connectors shown together

Jungle Leopard

Jungle Leopard Interstellar V2 120mm Case Fan Black Triple Pack

SKU CH-C6ET-48YT8

Triple pack of 120 mm hydraulic-bearing fans with daisy-chain ARGB infinity-mirror lighting, controller included, 68 CFM at under 32 dB(A)

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color Black-Forward

  • Triple pack cools 360 mm radiators with 68 CFM each
  • Hydraulic bearing runs 900-1850 RPM under 32 dB(A)
  • Daisy-chain slide-in pins cut cable count to one per cluster
  • Infinity-mirror side lighting adds depth without extra wiring
  • Eight damping pads suppress resonance to 29 dBA

Triple 120 mm ARGB fan kit

This triple pack supplies three 120 mm case fans with integrated infinity-mirror lighting and a daisy-chain interlock system. Each unit runs on a 4-pin connector and is designed for standard case mounts or a 360 mm liquid-cooling radiator.

Hydraulic bearing and nylon-mesh cables

Hydraulic bearings keep the 900-1850 RPM range smooth while eight damping pads limit resonance to 29 dBA. The nylon-mesh sleeved cables resist snagging, and the slide-in pin-to-pin locking lets a whole cluster run from a single lead for a cleaner interior.

Upgrade from single-cable or non-ARGB fans

Builders replacing basic 120 mm fans gain addressable lighting, lower cable count and 68 CFM airflow at 2.4 mmH₂O pressure without exceeding 32 dBA. The jump is worthwhile when a case or 360 mm cooler needs three matched fans that install in seconds rather than minutes.

Istaknuto

  • Triple pack cools 360 mm radiators with 68 CFM each
  • Hydraulic bearing runs 900-1850 RPM under 32 dB(A)
  • Daisy-chain slide-in pins cut cable count to one per cluster
  • Infinity-mirror side lighting adds depth without extra wiring
  • Eight damping pads suppress resonance to 29 dBA

Specifikacije

BrandJungle Leopard
SeriesInterstellar
ModelInterstellar V2
Part NumberInterstellar V2
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM900-1850RPM
Air Flow68CFM
Air Pressure2.4mmH20
Noise Level<32dB(A)
Power Connector4 Pin
ColorBlack
Dimensions120×120×25mm 4.72*4.72*0.98in

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

What does the 4-pin PWM connector on the Jungle Leopard Interstellar V2 actually control?

The 4-pin connector enables pulse-width modulation so the motherboard or supplied controller can vary speed precisely between 900 and 1850 RPM while reporting real-time tachometer feedback.

Will the 25 mm thick fans with their 8 vibration pads fit a standard 120 mm mounting grid?

Yes. Each fan measures 120 × 120 × 25 mm, matching the industry 120 mm hole pattern, and the eight corner pads add only a fraction of a millimetre without interfering with screws.

How do I connect the three fans in the daisy-chain without creating a short?

Align the slide-in pin-to-pin interlock on each fan, press firmly until the latch clicks, then run the single combined lead to the controller or motherboard header — reversing the orientation bends pins and breaks the chain.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.