Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Three black 120mm case fans with ARGB infinity mirror centres and reverse blades, shown as a triple pack

Jungle Leopard

Jungle Leopard Interstellar V2 RS 120mm Reverse Blade ARGB Case Fan 3-Pack Black

SKU CH-KMNJ-51HKH

Three 120 mm reverse-blade fans with ARGB infinity-mirror lighting, daisy-chain cabling and hydraulic bearings deliver 68 CFM at under 32 dB(A)

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color Black-Reverse

  • Quiet operation at 29dBA with hydraulic bearing
  • Daisy-chain slide-in design cuts cable clutter
  • Reverse blades deliver 68CFM airflow
  • Infinity mirror ARGB lighting on each fan
  • Three 120mm fans fit 360mm radiator

Three-Fan ARGB Kit

The Jungle Leopard Interstellar V2 RS ships as a triple pack of 120mm case fans with ARGB lighting and a hydraulic bearing. Each unit measures 120×120×25mm and connects via a standard 4-pin PWM header. The black finish and infinity-mirror side panels suit builders who want coordinated lighting across a 360mm radiator or multiple intake positions.

Daisy-Chain Upgrade

A slide-in pin-to-pin interlock lets the three fans share a single cable run, replacing the usual tangle of individual leads. The nylon-mesh sleeving on the updated wiring resists abrasion better than the first-generation loom. This arrangement is worth the switch when cable routing space behind the motherboard tray is tight or when a cleaner interior aesthetic matters.

Sustained Airflow Profile

At full speed the fans spin to 1850 RPM and deliver 68 CFM with 2.4 mmH₂O static pressure while staying below 32 dB(A). Eight damping pads suppress resonance so the acoustic signature remains steady during long gaming or rendering sessions. The hydraulic bearing maintains consistent torque without the wear spike that sleeve designs exhibit after extended continuous operation.

Istaknuto

  • Quiet operation at 29dBA with hydraulic bearing
  • Daisy-chain slide-in design cuts cable clutter
  • Reverse blades deliver 68CFM airflow
  • Infinity mirror ARGB lighting on each fan
  • Three 120mm fans fit 360mm radiator

Specifikacije

BrandJungle Leopard
SeriesInterstellar
ModelInterstellar V2 RS
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM900-1850RPM
Air Flow68CFM
Air Pressure2.4mmH20
Noise Level<32dB(A)
Power Connector4 Pin
ColorBlack
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

What case clearance does each 120mm × 25mm fan in the triple pack require?

Each fan measures 120×120×25mm, so the case needs at least 25mm depth at the mounting points and standard 120mm screw spacing.

How do the daisy-chain slide-in pins connect, and what step do builders often miss?

Align the PIN-to-PIN interlock on each fan, press until the latch clicks, then run a single 4-pin cable to the motherboard header; skipping the click leaves a loose data link.

When should the hydraulic bearing fans be cleaned or replaced?

Expect <32dB(A) at 900-1850RPM; if noise rises above 29dBA or airflow drops below 68CFM, remove dust from blades and pads or replace the affected unit.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.