KingSpec
KingSpec XG7000 4TB M.2 2280 PCIe 4.0 x4 NVMe 1.4 internal SSD
A 4 TB M.2 2280 NVMe 1.4 drive with PCIe 4.0 x4 speeds up to 7400 MBps read and 6600 MBps write, plus 2400 TBW endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity4TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4
Options XG 7000-4TB
- XG 7000-8TB
- XG 7000-4TB
- XG 7000-2TB
- XG 7000-1TB
- XG 7000-512GB
- XG7000-2TB-Soccer 2280
- XG 7000-2TB 2242
- XG 7000-1TB 2242
- XG 7000-512 2242
Läbikriipsutatud versioonid on olemas, kuid neid pole siin saadaval.
- Sequential reads reach 7400 MB/s via PCIe 4.0 x4 NVMe 1.4
- Sequential writes hit 6600 MB/s for rapid file transfers
- Random 4 KB reads up to 720000 IOPS accelerate game loads
- 2400 TBW and 1000000-hour MTBF indicate long endurance
- M.2 2280 form factor fits PS5, laptops and desktops
Capacity and interface
The KingSpec XG7000 is a 4 TB internal SSD built in the M.2 2280 form factor. It connects through a PCIe 4.0 x4 lane using the NVMe 1.4 protocol. The drive is intended for desktops, laptops and the PS5 console.
PCIe 4.0 x4 practical limits
Sequential throughput reaches 7400 MB/s read and 6600 MB/s write on a PCIe 4.0 platform. On a PCIe 3.0 slot the same drive will be limited to the 3.0 ceiling, so peak speeds cannot be realised. Random performance tops out at 720 000 read IOPS and 800 000 write IOPS.
Installation checks
Verify that your motherboard or laptop provides an M.2 2280 slot wired for PCIe 4.0 x4 and that the 2.1 mm module height clears any onboard heatsink or shield. The drive has no integrated heatsink, so confirm your platform supplies adequate airflow or add a third‑party spreader. Power draw peaks at 8.18 W active and 0.66 W idle.
Põhijooned
- Sequential reads reach 7400 MB/s via PCIe 4.0 x4 NVMe 1.4
- Sequential writes hit 6600 MB/s for rapid file transfers
- Random 4 KB reads up to 720000 IOPS accelerate game loads
- 2400 TBW and 1000000-hour MTBF indicate long endurance
- M.2 2280 form factor fits PS5, laptops and desktops
Tehnilised andmed
| Brand | KingSpec |
|---|---|
| Series | XG7000 Series |
| Model | XG7000 2280 |
| Part Number | XG7000-4TB 2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 4TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Max Sequential Read | Up to 7400 MBps |
| Max Sequential Write | Up to 6600 MBps |
| 4KB Random Read | Up to 720,000 IOPS |
| 4KB Random Write | Up to 800,000 IOPS |
| Terabytes Written (TBW) | 2400TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 0.66W |
| Power Consumption (Active) | 8.18W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -25°C ~ +75°C |
| Operating Humidity | 5-95% |
| Height | 80mm |
| Width | 22mm |
| Depth | 2.1mm |
| Weight | 30g |
Selle mudeli teised versioonid
5 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
KingSpec XG7000 2280 2TB M.2 2280 PCIe 4.0 x4 NVMe 1.4 internal SSD
- Internal Solid Stat…
- Consumer
KingSpec XG7000-2TB 2242 internal SSD with Heatsink
- Internal Solid Stat…
- Consumer
KingSpec XG 7000 8TB M.2 2280 PCIe 4.0 NVMe 1.4 internal SSD
- Internal Solid Stat…
- Consumer
Küsimused selle toote kohta
What capacity does the XG7000 come in?
The XG7000 is available as a single 4TB model with part number XG7000-4TB 2280.
What do the 7400 MBps read and 6600 MBps write figures mean in daily use?
They are peak sequential speeds; real-world throughput depends on the host controller, file sizes and thermal conditions.
Which interface and protocol does the drive use, and what limits its speed?
It uses PCI-Express 4.0 x4 with NVME 1.4; the four-lane Gen 4 link caps the maximum theoretical bandwidth.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.








