Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Black aluminium full-tower PC case with front mesh panel and side window

Lian Li

Lian Li PC-A76X Aluminium Full Tower PC case Black

SKU CH-KEPG-FQB0Q

Full-tower aluminium case supporting ATX, EATX, HPTX and Micro-ATX boards with twelve 3.5-inch bays, three 2.5-inch bays and eleven expansion slots

  • Aluminium construction keeps the full-tower chassis light at 9.5 kg
  • Fourteen drive bays support 12 x 3.5" and 3 x 2.5" drives plus two 5.25" devices
  • Eleven expansion slots and 36 cm GPU clearance handle large multi-card builds
  • 17 cm CPU cooler height limit fits tall tower air coolers
  • Front I/O includes two USB 3.0 and two USB 2.0 ports with audio jacks

Built for Large-Format Builds

This full-tower aluminium chassis accepts ATX, EATX, HPTX and Micro-ATX motherboards. Twelve 3.5-inch bays and three 2.5-inch bays give storage-heavy users room for large arrays. Two 5.25-inch bays remain for optical drives or front-panel accessories. It suits workstations and servers that need maximum internal volume.

Straightforward Assembly with Clear Limits

Three 140 mm front fans and one 120 mm rear fan ship pre-installed, so airflow works immediately. The 17 cm CPU cooler ceiling and 36 cm graphics card and PSU length limits are firm; exceeding them blocks the side panel or drive cages. Cable routing uses the standard channels behind the motherboard tray.

Verify Clearances Before Ordering

Measure your chosen CPU cooler height against the 17 cm maximum and confirm graphics card length stays within 36 cm. Ensure the power supply does not exceed 36 cm, or it will interfere with the lower drive bay area. The case weighs 9.5 kg and stands 585 mm tall, so confirm your workspace and desk can accommodate the footprint.

Põhijooned

  • Aluminium construction keeps the full-tower chassis light at 9.5 kg
  • Fourteen drive bays support 12 x 3.5" and 3 x 2.5" drives plus two 5.25" devices
  • Eleven expansion slots and 36 cm GPU clearance handle large multi-card builds
  • 17 cm CPU cooler height limit fits tall tower air coolers
  • Front I/O includes two USB 3.0 and two USB 2.0 ports with audio jacks

Tehnilised andmed

Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.

Küsimused selle toote kohta

How can I confirm the three 140 mm front fans and one 120 mm rear fan are spinning after I build in the PC-A76X?

Power on the system and visually check each fan through the front mesh and rear grille; the three 140 mm units at the front and the single 120 mm unit at the rear should all rotate steadily.

Which drives and accessories ship with the PC-A76X and which must I purchase separately?

The case includes two 5.25″ bays, twelve 3.5″ bays and three 2.5″ bays plus two USB 3.0 Type-A ports, two USB 2.0 ports and audio jacks; all drives, motherboard, CPU cooler, graphics card and power supply are bought separately.

Which motherboard form factor should I choose for the PC-A76X given its 11 expansion slots and 17 cm CPU cooler limit?

The chassis supports ATX, EATX, HPTX and Micro-ATX boards; select the largest form factor your build needs — EATX or HPTX for maximum slot use, ATX for standard builds, Micro-ATX for smaller projects — while ensuring your cooler stays within 17 cm height.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.