NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Lian Li
Full-tower aluminium case supporting ATX, EATX, HPTX and Micro-ATX boards with twelve 3.5-inch bays, three 2.5-inch bays and eleven expansion slots
This full-tower aluminium chassis accepts ATX, EATX, HPTX and Micro-ATX motherboards. Twelve 3.5-inch bays and three 2.5-inch bays give storage-heavy users room for large arrays. Two 5.25-inch bays remain for optical drives or front-panel accessories. It suits workstations and servers that need maximum internal volume.
Three 140 mm front fans and one 120 mm rear fan ship pre-installed, so airflow works immediately. The 17 cm CPU cooler ceiling and 36 cm graphics card and PSU length limits are firm; exceeding them blocks the side panel or drive cages. Cable routing uses the standard channels behind the motherboard tray.
Measure your chosen CPU cooler height against the 17 cm maximum and confirm graphics card length stays within 36 cm. Ensure the power supply does not exceed 36 cm, or it will interfere with the lower drive bay area. The case weighs 9.5 kg and stands 585 mm tall, so confirm your workspace and desk can accommodate the footprint.
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
Power on the system and visually check each fan through the front mesh and rear grille; the three 140 mm units at the front and the single 120 mm unit at the rear should all rotate steadily.
The case includes two 5.25″ bays, twelve 3.5″ bays and three 2.5″ bays plus two USB 3.0 Type-A ports, two USB 2.0 ports and audio jacks; all drives, motherboard, CPU cooler, graphics card and power supply are bought separately.
The chassis supports ATX, EATX, HPTX and Micro-ATX boards; select the largest form factor your build needs — EATX or HPTX for maximum slot use, ATX for standard builds, Micro-ATX for smaller projects — while ensuring your cooler stays within 17 cm height.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?