Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Black rectangular adapter with SATA and IDE connectors, USB 3.0 cable and 12V power supply

LUOM

LUOM SA28 USB 3.0 to SATA IDE Adapter with 12V Power

SKU CH-7XVJ-8MH04

Connects 2.5in or 3.5in SATA and IDE drives via USB 3.0 at up to 5Gbps with included 12V power for 3.5in devices

  • ColorBlack
  • Changer TypeUSB to IDE&SATA
  • SpecificationsAll in One Solution to Connect to Different Types of Interfa
  • Package ContentsAll in One Solution to Connect to Different Types of Interfa
  • Connect 2.5 or 3.5 SATA and IDE drives via USB 3.0
  • Transfer data at up to 5Gbps with USB 3.0 speed
  • Works with Windows, Mac, Linux and Chrome OS instantly
  • Offline clone function duplicates drives without a computer
  • 12V power adapter included for 3.5 inch drives

Universal Drive Adapter

The LUOM SA28 connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through a USB 3.0 port. It also supports DVD-ROM, CD-ROM, CD-RW, DVD-RW and DVD+RW optical drives. The adapter is compatible with Windows, Mac OS, Linux and Chrome OS. No driver installation is required for plug-and-play operation.

Build Integration

A USB 3.0 port on the host system is needed for full 5Gbps transfer speed, with backward compatibility to USB 2.0 and 1.1. The included 12V DC power supply is required for 3.5in drives, while 2.5in drives can often run from bus power. A 4-pin power cable is provided for 3.5in IDE devices. LED indicators show power and activity status.

Capacity and Headroom

Drives up to 6TB are supported for data transfer, backup and cloning tasks. The adapter handles SATA III speeds through its USB 3.0 interface, reaching up to 5Gbps. Actual throughput depends on the connected drive and host controller. Older IDE drives may require jumper configuration for master or slave selection before use.

Põhijooned

  • Connect 2.5 or 3.5 SATA and IDE drives via USB 3.0
  • Transfer data at up to 5Gbps with USB 3.0 speed
  • Works with Windows, Mac, Linux and Chrome OS instantly
  • Offline clone function duplicates drives without a computer
  • 12V power adapter included for 3.5 inch drives

Tehnilised andmed

BrandLUOM
ModelSA28
ColorBlack
Changer TypeUSB to IDE&SATA
SpecificationsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Supports drives with a capacity
Package ContentsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
No Drive Needed for Windows, Mac and Linux, Chrome
the included external power adapter will allow you to power your drives outside without opening your case. the plug and play function with no driving need, features works wonder with Windows and OSX saving your time and trouble,

Küsimused selle toote kohta

Will the 5 Gbps USB 3.0 link saturate before a 6 TB SATA drive hits its own throughput ceiling?

The adapter tops out at 5 Gbps, so any SATA drive capable of higher sustained rates will be limited by the USB connection.

Does the 12 V 2 A power brick and bridge chip run hot or noisy during all-day cloning jobs?

No fan is fitted; the unit relies on passive cooling and stays silent, though the enclosure may become warm to the touch.

Which host port and drive jumpers must I already have to use the 40-pin and 44-pin IDE connectors?

You need a USB 3.0 Type-A port on the host and must set the IDE drive jumper to master or slave before powering on.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.