SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00500607BTC
Laos
Matrix
Matrix MPS-3600S-200-18 3600W 200V 18A server power supply
Delivers 0-200V, 0-18A adjustable DC power up to 3600W with 0.1% accuracy, RS-485/RS-232 MODBUS control and full protection
- Single/RedundantMATRIX High-Power Lab Power Supply 3600W, 200V 18A
- Input Frequency Rangenot_applicable
- +12V RailsMATRIX High-Power Lab Power Supply 3600W, 200V 18A
- PFCMATRIX High-Power Lab Power Supply 3600W, 200V 18A
- Dimensions14 in x 20 in x 10 in
- Weight27.6 pounds
- 3600 W output drives demanding lab and server loads
- Adjustable 0-200 V / 0-18 A covers wide test ranges
- RS-485 and RS-232 with MODBUS RTU enable remote automation
- OVPOCPOTP and short-circuit protection safeguard connected equipment
- Preset buttons and key lock simplify bench operation
High-power lab supply for bench use
The Matrix MPS-3600S-200-18 is a programmable DC power supply rated at 3600W with a 0-200V and 0-18A output range. It operates on a 198-242Vac input at 50Hz and delivers 0.1% full-scale accuracy shown on a 5-digit display. Engineers and technicians use it for development, test and validation tasks that demand precise, adjustable power.
Replaces fixed-output or lower-wattage units
This supply supersedes fixed-voltage bench units or lower-power programmable models when a project requires up to 200V at 18A in a single instrument. The jump is worth it when test sequences need remote automation via RS-232 or RS-485 using MODBUS RTU, or when preset voltage and current buttons speed up repetitive setups. It is not for buyers who need AC output or multi-channel independent control.
Rack-mount installation with standard interfaces
The unit measures 14 x 20 x 10 in and weighs 27.6 lb, fitting typical 19-inch rack trays or deep benches. Installation consists of securing the chassis, connecting the high-voltage AC input and wiring the DC output terminals. Common issues include overlooking the 198Vac minimum input threshold, miswiring the remote-sense terminals, or forgetting to disable the key lock before remote commands.
Põhijooned
- 3600 W output drives demanding lab and server loads
- Adjustable 0-200 V / 0-18 A covers wide test ranges
- RS-485 and RS-232 with MODBUS RTU enable remote automation
- OVPOCPOTP and short-circuit protection safeguard connected equipment
- Preset buttons and key lock simplify bench operation
Tehnilised andmed
| Brand | MATRIX |
|---|---|
| Series | 200V 18A, MPS-3600S-200-18 |
| Model | 200V 18A |
| Part Number | MPS-3600S-200-18 |
| Single/Redundant | MATRIX High-Power Lab Power Supply 3600W, 200V 18A |
| Input Frequency Range | not_applicable |
| +12V Rails | MATRIX High-Power Lab Power Supply 3600W, 200V 18A |
| PFC | MATRIX High-Power Lab Power Supply 3600W, 200V 18A |
| Dimensions | 14 in x 20 in x 10 in |
| Weight | 27.6 pounds |
| Package Contents | MATRIX High-Power Lab Power Supply 3600W, 200V 18A x 1 |
Küsimused selle toote kohta
What are the dimensions and weight of the MPS-3600S-200-18 unit for bench or rack planning?
The unit measures 14 in x 20 in x 10 in and weighs 27.6 pounds, so allow that footprint and clearance for ventilation.
How do I connect the RS-485 and RS-232 interfaces for MODBUS RTU remote control?
Wire the RS-485 or RS-232 port to your PC or PLC, set the baud rate and address in the menu, then send MODBUS RTU commands to adjust voltage or current.
Which internal parts typically need replacement after extended high-load use?
The intelligent temperature-control fan and input filter capacitors are the main wear items; plan to inspect the fan annually and replace capacitors per the service schedule.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
