暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular silver metal server power supply unit with front panel display and controls

Matrix

Matrix MPS-3600S-200-18 3600W 200V 18A server power supply

SKU CH-4NWX-7P0S7

Delivers 0-200V, 0-18A adjustable DC power up to 3600W with 0.1% accuracy, RS-485/RS-232 MODBUS control and full protection

  • Single/RedundantMATRIX High-Power Lab Power Supply 3600W, 200V 18A
  • Input Frequency Rangenot_applicable
  • +12V RailsMATRIX High-Power Lab Power Supply 3600W, 200V 18A
  • PFCMATRIX High-Power Lab Power Supply 3600W, 200V 18A
  • Dimensions14 in x 20 in x 10 in
  • Weight27.6 pounds
  • 3600 W output drives demanding lab and server loads
  • Adjustable 0-200 V / 0-18 A covers wide test ranges
  • RS-485 and RS-232 with MODBUS RTU enable remote automation
  • OVPOCPOTP and short-circuit protection safeguard connected equipment
  • Preset buttons and key lock simplify bench operation

High-power lab supply for bench use

The Matrix MPS-3600S-200-18 is a programmable DC power supply rated at 3600W with a 0-200V and 0-18A output range. It operates on a 198-242Vac input at 50Hz and delivers 0.1% full-scale accuracy shown on a 5-digit display. Engineers and technicians use it for development, test and validation tasks that demand precise, adjustable power.

Replaces fixed-output or lower-wattage units

This supply supersedes fixed-voltage bench units or lower-power programmable models when a project requires up to 200V at 18A in a single instrument. The jump is worth it when test sequences need remote automation via RS-232 or RS-485 using MODBUS RTU, or when preset voltage and current buttons speed up repetitive setups. It is not for buyers who need AC output or multi-channel independent control.

Rack-mount installation with standard interfaces

The unit measures 14 x 20 x 10 in and weighs 27.6 lb, fitting typical 19-inch rack trays or deep benches. Installation consists of securing the chassis, connecting the high-voltage AC input and wiring the DC output terminals. Common issues include overlooking the 198Vac minimum input threshold, miswiring the remote-sense terminals, or forgetting to disable the key lock before remote commands.

特長

  • 3600 W output drives demanding lab and server loads
  • Adjustable 0-200 V / 0-18 A covers wide test ranges
  • RS-485 and RS-232 with MODBUS RTU enable remote automation
  • OVPOCPOTP and short-circuit protection safeguard connected equipment
  • Preset buttons and key lock simplify bench operation

仕様

BrandMATRIX
Series200V 18A, MPS-3600S-200-18
Model200V 18A
Part NumberMPS-3600S-200-18
Single/RedundantMATRIX High-Power Lab Power Supply 3600W, 200V 18A
Input Frequency Rangenot_applicable
+12V RailsMATRIX High-Power Lab Power Supply 3600W, 200V 18A
PFCMATRIX High-Power Lab Power Supply 3600W, 200V 18A
Dimensions14 in x 20 in x 10 in
Weight27.6 pounds
Package ContentsMATRIX High-Power Lab Power Supply 3600W, 200V 18A x 1

この商品に関する質問

What are the dimensions and weight of the MPS-3600S-200-18 unit for bench or rack planning?

The unit measures 14 in x 20 in x 10 in and weighs 27.6 pounds, so allow that footprint and clearance for ventilation.

How do I connect the RS-485 and RS-232 interfaces for MODBUS RTU remote control?

Wire the RS-485 or RS-232 port to your PC or PLC, set the baud rate and address in the menu, then send MODBUS RTU commands to adjust voltage or current.

Which internal parts typically need replacement after extended high-load use?

The intelligent temperature-control fan and input filter capacitors are the main wear items; plan to inspect the fan annually and replace capacitors per the service schedule.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。