Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Rectangular metal power supply unit with built-in cooling fan and terminal connectors

Mean Well

Mean Well HRPG-300-12 12V 27A 324W Power Supply

SKU CH-PG5C-NQ39F

Delivers 12 V at 27 A with active PFC, constant-current limiting, remote sense and DC-OK signal in a forced-air 1U chassis

  • TypeAT
  • Active PFC corrects power factor for efficient draw
  • Constant current limiting protects against overload damage
  • Remote sense compensates voltage drop over long cables
  • DC OK signal and remote on/off simplify system monitoring
  • 100% burn-in test and five-year warranty ensure reliability

Industrial 12 V power unit

The Mean Well HRPG-300-12 is a 324 W single-output supply built for industrial and embedded systems that need a steady 12 V rail. It accepts a universal AC input and includes active power-factor correction for efficient mains usage. The 1U low-profile form factor fits tight rack or chassis spaces where standard ATX units cannot. Buyers who need multiple voltage rails or higher wattage for multi-GPU workstations should look elsewhere.

Thermal and acoustic profile

A built-in DC fan provides forced-air cooling across the full 324 W load range. At no load the unit draws less than 0.5 W, keeping standby heat negligible in always-on installations. Protections against short circuit, overload, over-voltage and over-temperature shut the output down before components overheat. The constant-current limiting circuit prevents sudden current spikes during fault conditions.

27 A continuous current

The 12 V output is rated for 27 A continuous delivery, which determines whether the supply can drive your specific load. Remote-sense terminals compensate for voltage drop across long cable runs, and a DC-OK signal plus remote on/off control simplify system integration. A 5 V 0.3 A standby output is available for supervisory circuits. The unit has passed a 100 per cent full-load burn-in test.

Põhijooned

  • Active PFC corrects power factor for efficient draw
  • Constant current limiting protects against overload damage
  • Remote sense compensates voltage drop over long cables
  • DC OK signal and remote on/off simplify system monitoring
  • 100% burn-in test and five-year warranty ensure reliability

Tehnilised andmed

TypeAT

Küsimused selle toote kohta

How do I install the HRPG-300-12 and which step is often missed?

Mount the 1U low-profile unit, connect universal AC input, attach the DC fan for forced air cooling, then wire the remote sense terminals to the load — skipping the remote sense connection is the step most installers miss.

What maintenance or replacement will this power supply need later?

The built-in DC fan is the only moving part; plan to clean or replace it when airflow drops, and verify the 5V 0.3A standby output still reads correctly during routine checks.

What limit appears first when the HRPG-300-12 runs at full load for long periods?

Forced air cooling by the built-in DC fan sets the thermal ceiling; if the fan degrades or intake air exceeds design temperature, over-temperature protection will trip before any electrical limit is reached.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.