Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular metal power supply unit with built-in cooling fan and terminal connectors

Mean Well

Mean Well HRPG-300-12 12V 27A 324W Power Supply

SKU CH-PG5C-NQ39F

Delivers 12 V at 27 A with active PFC, constant-current limiting, remote sense and DC-OK signal in a forced-air 1U chassis

  • TypeAT
  • Active PFC corrects power factor for efficient draw
  • Constant current limiting protects against overload damage
  • Remote sense compensates voltage drop over long cables
  • DC OK signal and remote on/off simplify system monitoring
  • 100% burn-in test and five-year warranty ensure reliability

Industrial 12 V power unit

The Mean Well HRPG-300-12 is a 324 W single-output supply built for industrial and embedded systems that need a steady 12 V rail. It accepts a universal AC input and includes active power-factor correction for efficient mains usage. The 1U low-profile form factor fits tight rack or chassis spaces where standard ATX units cannot. Buyers who need multiple voltage rails or higher wattage for multi-GPU workstations should look elsewhere.

Thermal and acoustic profile

A built-in DC fan provides forced-air cooling across the full 324 W load range. At no load the unit draws less than 0.5 W, keeping standby heat negligible in always-on installations. Protections against short circuit, overload, over-voltage and over-temperature shut the output down before components overheat. The constant-current limiting circuit prevents sudden current spikes during fault conditions.

27 A continuous current

The 12 V output is rated for 27 A continuous delivery, which determines whether the supply can drive your specific load. Remote-sense terminals compensate for voltage drop across long cable runs, and a DC-OK signal plus remote on/off control simplify system integration. A 5 V 0.3 A standby output is available for supervisory circuits. The unit has passed a 100 per cent full-load burn-in test.

Přednosti

  • Active PFC corrects power factor for efficient draw
  • Constant current limiting protects against overload damage
  • Remote sense compensates voltage drop over long cables
  • DC OK signal and remote on/off simplify system monitoring
  • 100% burn-in test and five-year warranty ensure reliability

Specifikace

TypeAT

Otázky k tomuto produktu

How do I install the HRPG-300-12 and which step is often missed?

Mount the 1U low-profile unit, connect universal AC input, attach the DC fan for forced air cooling, then wire the remote sense terminals to the load — skipping the remote sense connection is the step most installers miss.

What maintenance or replacement will this power supply need later?

The built-in DC fan is the only moving part; plan to clean or replace it when airflow drops, and verify the 5V 0.3A standby output still reads correctly during routine checks.

What limit appears first when the HRPG-300-12 runs at full load for long periods?

Forced air cooling by the built-in DC fan sets the thermal ceiling; if the fan degrades or intake air exceeds design temperature, over-temperature protection will trip before any electrical limit is reached.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.