Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Black rectangular ATX power supply unit with embossed jacket modular cables and a 135 mm fan

MSI

MSI MPG A1000GS PCIE5 1000W power supply

SKU CH-VJRN-QGTGQ

A 1000 W ATX power supply with 80 PLUS Gold efficiency, dual native 12V-2x6 connectors for PCIe 5.1 graphics cards, a 135 mm fluid-dynamic bearing fan with Zero Fan Mode.

  • ColorBlack
  • TypeATX
  • Maximum Power1000 W
  • Fans1 x 135 mm
  • PFCActive
  • +12V Rails2
  • 80 PLUS Gold efficiency up to 90 percent reduces wasted energy
  • Dual native 12V-2x6 connectors each supply 600W for PCIe 5.1 graphics cards
  • 135 mm fluid-dynamic bearing fan extends unit lifespan
  • Full modular embossed jacket cables simplify routing and improve airflow
  • Compact 150 mm depth fits most ATX cases leaving room for other components

Power delivery for PCIe 5.1 GPUs

This 1000 W ATX power supply carries 80 Plus Gold certification with up to 90 percent efficiency. It ships with two native 12V-2x6 connectors, each rated to supply up to 600 W to a PCIe 5.1 graphics card. The unit is fully modular and uses embossed jacket cables with premium copper alloy connectors.

Who this suits and who it does not

Builders installing a single high-end GPU that requires the 12V-2x6 interface will find the dual connectors convenient. Systems that demand more than 1000 W of total output or need more than eight SATA power connectors should look at a higher-capacity or differently configured unit.

The deciding specification

The dual native 12V-2x6 connectors are the feature that determines fit. If your graphics card uses this interface, the power supply can deliver up to 600 W per port without adapters; if it does not, those connectors will go unused.

Põhijooned

  • 80 PLUS Gold efficiency up to 90 percent reduces wasted energy
  • Dual native 12V-2x6 connectors each supply 600W for PCIe 5.1 graphics cards
  • 135 mm fluid-dynamic bearing fan extends unit lifespan
  • Full modular embossed jacket cables simplify routing and improve airflow
  • Compact 150 mm depth fits most ATX cases leaving room for other components

Tehnilised andmed

BrandMSI
ModelMPG A1000GS PCIE5
Part NumberMPG A1000GS PCIE5
ColorBlack
TypeATX
Maximum Power1000 W
Fans1 x 135 mm
PFCActive
+12V Rails2
SATA Power Connector8
ModularFull Modular
Energy-EfficientUp to 90%
ProtectionOVP/ OCP/ OTP/ OPP/ SCP/ UVP
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz

Küsimused selle toote kohta

Should I pick the 1000 W model or is a lower-wattage unit enough?

Choose 1000 W if your build includes a PCIe 5.1 GPU that can draw up to 600 W per 12V-2x6 connector; a lower-wattage PSU would not guarantee that headroom.

What does the 1000 W rating mean once the PSU is installed in my PC?

It means the unit can sustain 1000 W total output across its two +12 V rails while maintaining up to 90 % efficiency at typical loads, so your components receive stable power even under heavy gaming or rendering.

How does the ATX 3.1 and PCIe 5.1 readiness affect what I can plug in?

The two native 12V-2x6 connectors each deliver up to 600 W, letting you power a PCIe 5.1 graphics card such as a 5090 or 5080 without adapters, while the ATX 3.1 compliance ensures proper transient response for modern GPUs.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.