Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black rectangular ATX power supply unit with embossed jacket modular cables and a 135 mm fan

MSI

MSI MPG A1000GS PCIE5 1000W power supply

SKU CH-VJRN-QGTGQ

A 1000 W ATX power supply with 80 PLUS Gold efficiency, dual native 12V-2x6 connectors for PCIe 5.1 graphics cards, a 135 mm fluid-dynamic bearing fan with Zero Fan Mode.

  • ColorBlack
  • TypeATX
  • Maximum Power1000 W
  • Fans1 x 135 mm
  • PFCActive
  • +12V Rails2
  • 80 PLUS Gold efficiency up to 90 percent reduces wasted energy
  • Dual native 12V-2x6 connectors each supply 600W for PCIe 5.1 graphics cards
  • 135 mm fluid-dynamic bearing fan extends unit lifespan
  • Full modular embossed jacket cables simplify routing and improve airflow
  • Compact 150 mm depth fits most ATX cases leaving room for other components

Power delivery for PCIe 5.1 GPUs

This 1000 W ATX power supply carries 80 Plus Gold certification with up to 90 percent efficiency. It ships with two native 12V-2x6 connectors, each rated to supply up to 600 W to a PCIe 5.1 graphics card. The unit is fully modular and uses embossed jacket cables with premium copper alloy connectors.

Who this suits and who it does not

Builders installing a single high-end GPU that requires the 12V-2x6 interface will find the dual connectors convenient. Systems that demand more than 1000 W of total output or need more than eight SATA power connectors should look at a higher-capacity or differently configured unit.

The deciding specification

The dual native 12V-2x6 connectors are the feature that determines fit. If your graphics card uses this interface, the power supply can deliver up to 600 W per port without adapters; if it does not, those connectors will go unused.

Kohokohdat

  • 80 PLUS Gold efficiency up to 90 percent reduces wasted energy
  • Dual native 12V-2x6 connectors each supply 600W for PCIe 5.1 graphics cards
  • 135 mm fluid-dynamic bearing fan extends unit lifespan
  • Full modular embossed jacket cables simplify routing and improve airflow
  • Compact 150 mm depth fits most ATX cases leaving room for other components

Tekniset tiedot

BrandMSI
ModelMPG A1000GS PCIE5
Part NumberMPG A1000GS PCIE5
ColorBlack
TypeATX
Maximum Power1000 W
Fans1 x 135 mm
PFCActive
+12V Rails2
SATA Power Connector8
ModularFull Modular
Energy-EfficientUp to 90%
ProtectionOVP/ OCP/ OTP/ OPP/ SCP/ UVP
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz

Kysymyksiä tästä tuotteesta

Should I pick the 1000 W model or is a lower-wattage unit enough?

Choose 1000 W if your build includes a PCIe 5.1 GPU that can draw up to 600 W per 12V-2x6 connector; a lower-wattage PSU would not guarantee that headroom.

What does the 1000 W rating mean once the PSU is installed in my PC?

It means the unit can sustain 1000 W total output across its two +12 V rails while maintaining up to 90 % efficiency at typical loads, so your components receive stable power even under heavy gaming or rendering.

How does the ATX 3.1 and PCIe 5.1 readiness affect what I can plug in?

The two native 12V-2x6 connectors each deliver up to 600 W, letting you power a PCIe 5.1 graphics card such as a 5090 or 5080 without adapters, while the ATX 3.1 compliance ensures proper transient response for modern GPUs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.