BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.002756BTC
Laos
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 ECC RDIMM CL22 1Rx8 1.2V 288-Pin memory upgrade
A 16 GB dual-channel DDR4 3200 ECC registered kit with CL22 latency for Thinkmate rackmount servers
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data corruption in server workloads
- Registered design stabilises signal integrity on multi-module channels
- DDR4 3200 speed delivers 25 600 MB/s bandwidth per module
- 2 V operation reduces power draw and heat output
- 16 GB dual-channel kit (2×8 GB) expands capacity for virtualisation
Server-grade DDR4 ECC RDIMM kit
This 16 GB kit (2 × 8 GB) delivers DDR4 3200 registered ECC memory for Thinkmate RAX-PT10-11A1, RAX-PT8-12A1 and RAX-PT12-12A1 rackmount servers. It targets IT professionals who need validated, error-correcting modules for mission-critical workloads.
Registered DDR4 3200 with CL22 latency
The modules run at 1.2 V with a CAS latency of 22 and a single-rank 1Rx8 organisation. Registered buffering adds one clock cycle of address/command delay, so the memory controller must support RDIMM topology and the platform must enable ECC in the BIOS.
Replaces non-ECC or slower DDR4 RDIMMs
The upgrade is worthwhile when the existing installation uses unbuffered DIMMs, lower-speed DDR4 or lacks error correction. It is not for systems that accept only UDIMMs, require LRDIMM or 3DS modules, or operate on DDR5 platforms.
Põhijooned
- ECC protection prevents data corruption in server workloads
- Registered design stabilises signal integrity on multi-module channels
- DDR4 3200 speed delivers 25 600 MB/s bandwidth per module
- 2 V operation reduces power draw and heat output
- 16 GB dual-channel kit (2×8 GB) expands capacity for virtualisation
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
Küsimused selle toote kohta
Should I choose the 16GB kit or add another kit for more capacity?
The kit provides 16GB as two 8GB modules. Adding a second identical kit would double capacity to 32GB if your Thinkmate server has free DIMM slots and the memory controller supports the total population.
What does the 3200MHz speed mean once installed in my Thinkmate server?
The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.2V. Actual throughput depends on the server's memory controller and how many slots are populated; the system will clock them to the highest supported JEDEC speed.
Is the 288-pin RDIMM interface compatible with my Thinkmate RAX-PT10-11A1?
Yes, these are 288-pin DDR4 ECC registered DIMMs built for Thinkmate RAX-PT10-11A1, RAX-PT8-12A1 and RAX-PT12-12A1 rackmount servers. The registered buffer and ECC match the platform's requirements.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
