Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two green DDR4 RDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 ECC RDIMM CL22 1Rx8 1.2V 288-Pin memory upgrade

SKU CH-AWY2-5CJGH

A 16 GB dual-channel DDR4 3200 ECC registered kit with CL22 latency for Thinkmate rackmount servers

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in server workloads
  • Registered design stabilises signal integrity on multi-module channels
  • DDR4 3200 speed delivers 25 600 MB/s bandwidth per module
  • 2 V operation reduces power draw and heat output
  • 16 GB dual-channel kit (2×8 GB) expands capacity for virtualisation

Server-grade DDR4 ECC RDIMM kit

This 16 GB kit (2 × 8 GB) delivers DDR4 3200 registered ECC memory for Thinkmate RAX-PT10-11A1, RAX-PT8-12A1 and RAX-PT12-12A1 rackmount servers. It targets IT professionals who need validated, error-correcting modules for mission-critical workloads.

Registered DDR4 3200 with CL22 latency

The modules run at 1.2 V with a CAS latency of 22 and a single-rank 1Rx8 organisation. Registered buffering adds one clock cycle of address/command delay, so the memory controller must support RDIMM topology and the platform must enable ECC in the BIOS.

Replaces non-ECC or slower DDR4 RDIMMs

The upgrade is worthwhile when the existing installation uses unbuffered DIMMs, lower-speed DDR4 or lacks error correction. It is not for systems that accept only UDIMMs, require LRDIMM or 3DS modules, or operate on DDR5 platforms.

I korthet

  • ECC protection prevents data corruption in server workloads
  • Registered design stabilises signal integrity on multi-module channels
  • DDR4 3200 speed delivers 25 600 MB/s bandwidth per module
  • 2 V operation reduces power draw and heat output
  • 16 GB dual-channel kit (2×8 GB) expands capacity for virtualisation

Specifikationer

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Frågor om den här produkten

Should I choose the 16GB kit or add another kit for more capacity?

The kit provides 16GB as two 8GB modules. Adding a second identical kit would double capacity to 32GB if your Thinkmate server has free DIMM slots and the memory controller supports the total population.

What does the 3200MHz speed mean once installed in my Thinkmate server?

The modules run at DDR4 3200 (PC4-25600) with CL22 latency at 1.2V. Actual throughput depends on the server's memory controller and how many slots are populated; the system will clock them to the highest supported JEDEC speed.

Is the 288-pin RDIMM interface compatible with my Thinkmate RAX-PT10-11A1?

Yes, these are 288-pin DDR4 ECC registered DIMMs built for Thinkmate RAX-PT10-11A1, RAX-PT8-12A1 and RAX-PT12-12A1 rackmount servers. The registered buffer and ECC match the platform's requirements.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.