SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00495794BTC
Laos
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 ECC RDIMM 2Rx8 CL22 SuperMicro MEM-DR416L-HL01-ER32 memory upgrade
Adds 16 GB of DDR4 3200 ECC registered memory with CL22 latency and 1.2 V operation for compatible Supermicro servers
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB capacity for demanding server workloads
- DDR4 3200 speed with PC4-25600 bandwidth
- ECC registered design protects data integrity
- CL22 latency at 1.20V operating voltage
- 288-pin 2Rx8 module built for Supermicro systems
16GB DDR4 3200 ECC RDIMM for Supermicro servers
This 16GB registered DDR4 module runs at 3200MHz with CL22 latency and 1.20V operation. It uses a 2Rx8 organisation and 288-pin form factor for Supermicro server and workstation platforms. ECC and registered buffering provide the data integrity required in mission-critical environments.
Registered ECC DDR4 limits
Registered DIMMs add a clock cycle of latency and require a motherboard chipset that supports registered signalling. The DDR4 3200 standard caps at PC4-25600 bandwidth, so throughput cannot exceed this ceiling. Mixing registered and unbuffered modules on the same channel is not supported by the DDR4 specification.
Verify platform compatibility before ordering
Confirm your Supermicro system accepts 288-pin DDR4 RDIMMs at 3200MHz and can populate the target slot with a 2Rx8 module. Check the motherboard manual for maximum capacity per channel and approved vendor lists. Ensure the BIOS revision supports the installed memory configuration.
Põhijooned
- 16GB capacity for demanding server workloads
- DDR4 3200 speed with PC4-25600 bandwidth
- ECC registered design protects data integrity
- CL22 latency at 1.20V operating voltage
- 288-pin 2Rx8 module built for Supermicro systems
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
Küsimused selle toote kohta
Should I choose the 16GB 2Rx8 module or look for a different capacity for my Supermicro server?
This module provides 16GB in a single 2Rx8 rank configuration; add multiple sticks to reach your desired total capacity.
What does the DDR4 3200 PC4-25600 rating deliver in a registered server board?
It runs at 3200 MT/s with CL22 latency at 1.20V, giving standard JEDEC throughput for ECC RDIMM workloads.
How does the 288-pin ECC RDIMM interface limit performance in practice?
The registered 288-pin DDR4 interface caps speed at the rated 3200 MT/s and requires a motherboard that supports ECC RDIMM modules.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
