Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green rectangular DDR4 RDIMM module with black chips on both sides, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 ECC RDIMM 2Rx8 CL22 SuperMicro MEM-DR416L-HL01-ER32 memory upgrade

SKU CH-BTT1-AQX0N

Adds 16 GB of DDR4 3200 ECC registered memory with CL22 latency and 1.2 V operation for compatible Supermicro servers

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB capacity for demanding server workloads
  • DDR4 3200 speed with PC4-25600 bandwidth
  • ECC registered design protects data integrity
  • CL22 latency at 1.20V operating voltage
  • 288-pin 2Rx8 module built for Supermicro systems

16GB DDR4 3200 ECC RDIMM for Supermicro servers

This 16GB registered DDR4 module runs at 3200MHz with CL22 latency and 1.20V operation. It uses a 2Rx8 organisation and 288-pin form factor for Supermicro server and workstation platforms. ECC and registered buffering provide the data integrity required in mission-critical environments.

Registered ECC DDR4 limits

Registered DIMMs add a clock cycle of latency and require a motherboard chipset that supports registered signalling. The DDR4 3200 standard caps at PC4-25600 bandwidth, so throughput cannot exceed this ceiling. Mixing registered and unbuffered modules on the same channel is not supported by the DDR4 specification.

Verify platform compatibility before ordering

Confirm your Supermicro system accepts 288-pin DDR4 RDIMMs at 3200MHz and can populate the target slot with a 2Rx8 module. Check the motherboard manual for maximum capacity per channel and approved vendor lists. Ensure the BIOS revision supports the installed memory configuration.

Helstu kostir

  • 16GB capacity for demanding server workloads
  • DDR4 3200 speed with PC4-25600 bandwidth
  • ECC registered design protects data integrity
  • CL22 latency at 1.20V operating voltage
  • 288-pin 2Rx8 module built for Supermicro systems

Tæknilýsing

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Spurningar um þessa vöru

Should I choose the 16GB 2Rx8 module or look for a different capacity for my Supermicro server?

This module provides 16GB in a single 2Rx8 rank configuration; add multiple sticks to reach your desired total capacity.

What does the DDR4 3200 PC4-25600 rating deliver in a registered server board?

It runs at 3200 MT/s with CL22 latency at 1.20V, giving standard JEDEC throughput for ECC RDIMM workloads.

How does the 288-pin ECC RDIMM interface limit performance in practice?

The registered 288-pin DDR4 interface caps speed at the rated 3200 MT/s and requires a motherboard that supports ECC RDIMM modules.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.