BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00280875BTC
Laos
NEMIX RAM
NEMIX RAM 192GB (4×48GB) DDR5 5600 CL46 1.1V UDIMM Supermicro BH4SR2-25G memory upgrade
A 192 GB DDR5 kit of four 48 GB UDIMMs running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the Supermicro BH4SR2-25G motherboard
- Capacity192GB (4 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 192GB total capacity from four 48GB modules for heavy multitasking
- DDR5 5600 speed delivers high bandwidth for demanding workloads
- CL46 latency at 1.1V balances responsiveness with low power draw
- 2Rx8 dual-rank organisation increases memory density per channel
- Validated for Supermicro BH4SR2-25G motherboard compatibility
192GB DDR5 kit for Supermicro BH4SR2-25G
This 192GB kit contains four 48GB DDR5 UDIMMs rated at 5600 MT/s with CL46 latency. It is built for the Supermicro BH4SR2-25G motherboard and targets workstations that need high capacity for virtualisation, rendering or large datasets.
Verify DDR5 UDIMM support and slot count
Confirm the board accepts non-ECC unbuffered DDR5 UDIMMs and has four free 288-pin slots. The modules run at 1.1V with a 2Rx8 organisation and no heat spreader, so ensure the BIOS can apply the correct voltage and timing without XMP profiles.
Steady throughput at standard voltage
At 1.1V the modules operate within JEDEC limits, so sustained workloads do not push voltage or temperature beyond spec. The CL46 latency and dual-rank layout deliver consistent bandwidth during long compile jobs or memory-bound simulations.
Põhijooned
- 192GB total capacity from four 48GB modules for heavy multitasking
- DDR5 5600 speed delivers high bandwidth for demanding workloads
- CL46 latency at 1.1V balances responsiveness with low power draw
- 2Rx8 dual-rank organisation increases memory density per channel
- Validated for Supermicro BH4SR2-25G motherboard compatibility
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-4828K4 |
| Capacity | 192GB (4 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 192GB (4 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Küsimused selle toote kohta
What does the kit contain and is anything else required?
The kit contains four 48GB DDR5 5600 CL46 1.1V 288-pin UDIMM modules for a total of 192GB. No extra parts are needed for installation.
How do I decide between the available capacities?
This kit is offered as a single 192GB (4×48GB) configuration matched to the Supermicro BH4SR2-25G motherboard. Choose it when you need the maximum supported capacity.
What does the 5600 speed rating mean once the memory is installed?
The modules run at DDR5 5600 (PC5-44800) with CL46 latency at 1.10V, delivering the rated throughput and timing on the compatible Supermicro board.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
