Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Four green DDR5 UDIMM modules with black chips no heat spreaders

NEMIX RAM

NEMIX RAM 192GB (4×48GB) DDR5 5600 CL46 1.1V UDIMM Supermicro BH4SR2-25G memory upgrade

SKU CH-W8E9-XMXME

A 192 GB DDR5 kit of four 48 GB UDIMMs running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the Supermicro BH4SR2-25G motherboard

  • Capacity192GB (4 x 48GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 192GB total capacity from four 48GB modules for heavy multitasking
  • DDR5 5600 speed delivers high bandwidth for demanding workloads
  • CL46 latency at 1.1V balances responsiveness with low power draw
  • 2Rx8 dual-rank organisation increases memory density per channel
  • Validated for Supermicro BH4SR2-25G motherboard compatibility

192GB DDR5 kit for Supermicro BH4SR2-25G

This 192GB kit contains four 48GB DDR5 UDIMMs rated at 5600 MT/s with CL46 latency. It is built for the Supermicro BH4SR2-25G motherboard and targets workstations that need high capacity for virtualisation, rendering or large datasets.

Verify DDR5 UDIMM support and slot count

Confirm the board accepts non-ECC unbuffered DDR5 UDIMMs and has four free 288-pin slots. The modules run at 1.1V with a 2Rx8 organisation and no heat spreader, so ensure the BIOS can apply the correct voltage and timing without XMP profiles.

Steady throughput at standard voltage

At 1.1V the modules operate within JEDEC limits, so sustained workloads do not push voltage or temperature beyond spec. The CL46 latency and dual-rank layout deliver consistent bandwidth during long compile jobs or memory-bound simulations.

Puntos fuertes

  • 192GB total capacity from four 48GB modules for heavy multitasking
  • DDR5 5600 speed delivers high bandwidth for demanding workloads
  • CL46 latency at 1.1V balances responsiveness with low power draw
  • 2Rx8 dual-rank organisation increases memory density per channel
  • Validated for Supermicro BH4SR2-25G motherboard compatibility

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-4828K4
Capacity192GB (4 x 48GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content192GB (4 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Preguntas sobre este artículo

What does the kit contain and is anything else required?

The kit contains four 48GB DDR5 5600 CL46 1.1V 288-pin UDIMM modules for a total of 192GB. No extra parts are needed for installation.

How do I decide between the available capacities?

This kit is offered as a single 192GB (4×48GB) configuration matched to the Supermicro BH4SR2-25G motherboard. Choose it when you need the maximum supported capacity.

What does the 5600 speed rating mean once the memory is installed?

The modules run at DDR5 5600 (PC5-44800) with CL46 latency at 1.10V, delivering the rated throughput and timing on the compatible Supermicro board.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.