NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.
NEMIX RAM
256 GB DDR5 ECC registered server memory kit with two 128 GB modules at 4800 MT/s, CL40, 1.1 V for Dell Precision 5860 workstations
This kit provides 256GB of DDR5 memory in two 128GB registered DIMMs. It is built for Dell Precision 5860 tower workstations that require ECC protection. The modules operate at 4800 MT/s with a CAS latency of 40. They run at 1.1V and use a 288-pin form factor.
Registered buffering and ECC correction maintain data integrity during continuous workloads. The 4Rx4 organisation allows high density without increasing electrical load on the memory controller. Operation at 1.1V limits heat output during extended compute tasks. No heat spreader is fitted, so chassis airflow must handle cooling.
The PC5-38400 rating defines the peak transfer rate of the DDR5 interface. Maximum capacity per DIMM is 128GB with this rank configuration. Registered DIMMs require a motherboard that supports buffered memory. Mixing with unbuffered or non-ECC modules is not supported.
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Series Server Memory |
| Model | Dell Compatible DDR5 ECC Registered RDIMM |
| Part Number | MR38400-744K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 ECC Registered Server Motherboard Compatible |
Each module operates at 1.10V, the standard DDR5 voltage for registered ECC memory. Total system draw depends on the Dell Precision 5860 memory controller and how many slots are populated.
The kit is listed as compatible with the Dell Precision 5860 Tower Workstation. Dell validates memory configurations per BIOS release, so check the workstation's support page for the latest firmware before installing.
Mixing ranks and capacities is possible on DDR5 platforms, but the memory controller will run all modules at the lowest common speed and timing. For best stability, populate identical 4Rx4 modules per channel.
Veel samast osakonnast
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
See, millega maksate, ja see, milles vaatate hindu.
Saadetud teie rahakotist kassas
Ainult kuvamiseks — kataloogi hinnad on dollarites
Ükski vääring ei vasta sellele.
Valige keel, milles sait teiega räägib.
Esimest korda siin?
Teil on juba konto?
Automaatset lähtestamist ei ole: see pood ei saada ühtegi e-kirja, seega pole ka ühekordset linki, mida küsida. Jätke aadress kontole alles, seda käsitletakse käsitsi.
Päring registreeritud
Teie postkasti ei jõua midagi — see pood ei saada e-kirju üldse. Keegi tegeleb sellega käsitsi.
Tuli meelde?