NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
NEMIX RAM
256 GB DDR5 ECC registered server memory kit with two 128 GB modules at 4800 MT/s, CL40, 1.1 V for Dell Precision 5860 workstations
This kit provides 256GB of DDR5 memory in two 128GB registered DIMMs. It is built for Dell Precision 5860 tower workstations that require ECC protection. The modules operate at 4800 MT/s with a CAS latency of 40. They run at 1.1V and use a 288-pin form factor.
Registered buffering and ECC correction maintain data integrity during continuous workloads. The 4Rx4 organisation allows high density without increasing electrical load on the memory controller. Operation at 1.1V limits heat output during extended compute tasks. No heat spreader is fitted, so chassis airflow must handle cooling.
The PC5-38400 rating defines the peak transfer rate of the DDR5 interface. Maximum capacity per DIMM is 128GB with this rank configuration. Registered DIMMs require a motherboard that supports buffered memory. Mixing with unbuffered or non-ECC modules is not supported.
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Series Server Memory |
| Model | Dell Compatible DDR5 ECC Registered RDIMM |
| Part Number | MR38400-744K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 ECC Registered Server Motherboard Compatible |
Each module operates at 1.10V, the standard DDR5 voltage for registered ECC memory. Total system draw depends on the Dell Precision 5860 memory controller and how many slots are populated.
The kit is listed as compatible with the Dell Precision 5860 Tower Workstation. Dell validates memory configurations per BIOS release, so check the workstation's support page for the latest firmware before installing.
Mixing ranks and capacities is possible on DDR5 platforms, but the memory controller will run all modules at the lowest common speed and timing. For best stability, populate identical 4Rx4 modules per channel.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?