Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse

NEMIX RAM

NEMIX RAM 32GB (2×16GB) DDR5 5600 CL46 1.1V UDIMM Supermicro X14SAE

SKU CH-ZVPQ-7S9SN

32 GB dual-channel DDR5-5600 kit with CL46 timing and 1.1 V operation, verified for the Supermicro X14SAE motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • 32 GB dual-channel capacity with two 16 GB modules
  • DDR5 5600 speed rated at PC5-44800 for faster data throughput
  • CL46 latency at 1.1 V keeps power draw low
  • 288-pin UDIMM form factor fits Supermicro X14SAE exactly
  • Major OEM chips from Samsung, Micron, Hynix tested for stability

Exact DDR5 upgrade for Supermicro X14SAE

This 32 GB kit (2 × 16 GB) is a DDR5 5600 PC5-44800 UDIMM with CL46 timing, 1.10 V operation and 1Rx8 rank. Non-ECC unbuffered design matches the motherboard's memory controller requirements so the system recognises the full capacity at rated speed.

Fits 288-pin DDR5 slots on the X14SAE

The modules use the standard 288-pin UDIMM form factor this board requires, not an ECC server module or SODIMM. Rank, voltage and timing are spec-matched to the board's population rules, freeing you from manual configuration and avoiding mismatched DIMM errors.

Lifetime support and major OEM chips

Built with Samsung, Micron or Hynix components and tested at rated speed, timing and voltage. The kit includes only the two UDIMMs; no heat spreaders or extra software are supplied. Buyers who need ECC, registered modules or higher capacities must choose a different product.

Põhijooned

  • 32 GB dual-channel capacity with two 16 GB modules
  • DDR5 5600 speed rated at PC5-44800 for faster data throughput
  • CL46 latency at 1.1 V keeps power draw low
  • 288-pin UDIMM form factor fits Supermicro X14SAE exactly
  • Major OEM chips from Samsung, Micron, Hynix tested for stability

Tehnilised andmed

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

What is the CAS latency of the NEMIX RAM DDR5 5600 kit?

The kit runs at CL46 latency, which is the rated timing the memory controller expects for stable operation at 5600 MT/s.

How much power does the 32 GB DDR5 kit draw at its rated 1.1 V?

Each module operates at 1.10 V, the standard DDR5 voltage, keeping power draw low during continuous all-day workloads.

Does my Supermicro X14SAE motherboard need any specific DIMM population order for this 2×16 GB kit?

The board's manual defines the supported capacities and approved DIMM population order; consult it before installing the two 16 GB UDIMMs.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.