Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green circuit boards with black chips and gold contacts side by side

NEMIX RAM

NEMIX RAM 32GB (2×16GB) DDR5 5600 CL46 1.1V UDIMM Supermicro X14SAE

SKU CH-ZVPQ-7S9SN

32 GB dual-channel DDR5-5600 kit with CL46 timing and 1.1 V operation, verified for the Supermicro X14SAE motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 2X16GB

  • 32 GB dual-channel capacity with two 16 GB modules
  • DDR5 5600 speed rated at PC5-44800 for faster data throughput
  • CL46 latency at 1.1 V keeps power draw low
  • 288-pin UDIMM form factor fits Supermicro X14SAE exactly
  • Major OEM chips from Samsung, Micron, Hynix tested for stability

Exact DDR5 upgrade for Supermicro X14SAE

This 32 GB kit (2 × 16 GB) is a DDR5 5600 PC5-44800 UDIMM with CL46 timing, 1.10 V operation and 1Rx8 rank. Non-ECC unbuffered design matches the motherboard's memory controller requirements so the system recognises the full capacity at rated speed.

Fits 288-pin DDR5 slots on the X14SAE

The modules use the standard 288-pin UDIMM form factor this board requires, not an ECC server module or SODIMM. Rank, voltage and timing are spec-matched to the board's population rules, freeing you from manual configuration and avoiding mismatched DIMM errors.

Lifetime support and major OEM chips

Built with Samsung, Micron or Hynix components and tested at rated speed, timing and voltage. The kit includes only the two UDIMMs; no heat spreaders or extra software are supplied. Buyers who need ECC, registered modules or higher capacities must choose a different product.

Přednosti

  • 32 GB dual-channel capacity with two 16 GB modules
  • DDR5 5600 speed rated at PC5-44800 for faster data throughput
  • CL46 latency at 1.1 V keeps power draw low
  • 288-pin UDIMM form factor fits Supermicro X14SAE exactly
  • Major OEM chips from Samsung, Micron, Hynix tested for stability

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What is the CAS latency of the NEMIX RAM DDR5 5600 kit?

The kit runs at CL46 latency, which is the rated timing the memory controller expects for stable operation at 5600 MT/s.

How much power does the 32 GB DDR5 kit draw at its rated 1.1 V?

Each module operates at 1.10 V, the standard DDR5 voltage, keeping power draw low during continuous all-day workloads.

Does my Supermicro X14SAE motherboard need any specific DIMM population order for this 2×16 GB kit?

The board's manual defines the supported capacities and approved DIMM population order; consult it before installing the two 16 GB UDIMMs.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.