BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278355BTC
Laos
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 2666MHz CL19 SODIMM Kit for POSIFLEX XT-7315
32GB DDR4 2666MHz CL19 SODIMM kit upgrades POSIFLEX XT-7315 with two 16GB modules
- Capacity32GB (2 x 16GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit expands POS terminal memory capacity
- DDR4 2666 speed matches system specification
- CL19 latency supports stable operation
- 20 V low-voltage modules reduce power draw
- 260-pin SODIMM form factor fits POSIFLEX XT-7315
NEMIX RAM 32GB DDR4 2666MHz SODIMM Kit
This 32GB kit contains two 16GB DDR4 2666MHz SODIMM modules built for the POSIFLEX XT-7315 terminal. It runs at 1.2V with CL19 latency and uses 260-pin unbuffered non-ECC memory. Major OEM chips from Samsung, Micron or Hynix deliver reliable operation in point-of-sale environments.
Simple 260-Pin SODIMM Installation
Installation typically takes a few minutes by inserting both modules into the terminal's memory slots. Always consult the owner's manual for detailed instructions specific to the XT-7315. The 2Rx8 rank configuration and 1.20V voltage match the system requirements, reducing the risk of compatibility errors during the upgrade process.
Ideal for POSIFLEX XT-7315 Terminal Upgrades
This kit suits technicians upgrading memory in POSIFLEX XT-7315 JIVA foldable 15 terminals to the full 32GB capacity. It is not for systems requiring ECC registered memory, different voltage levels, or DDR5 modules. Buyers needing higher speeds, lower latencies, or desktop DIMM form factors should look at other memory solutions.
Põhijooned
- 32 GB kit expands POS terminal memory capacity
- DDR4 2666 speed matches system specification
- CL19 latency supports stable operation
- 20 V low-voltage modules reduce power draw
- 260-pin SODIMM form factor fits POSIFLEX XT-7315
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS21300-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT |
Küsimused selle toote kohta
How can I verify the kit is running at 2666 MHz CL19 after installing it in the POSIFLEX XT-7315?
Enter the system BIOS or use a tool like CPU-Z; the memory tab should show DDR4-2666 with CAS latency 19 and 1.20 V on both 16 GB modules.
What exactly ships in the box and is anything else required for installation?
The package contains two 16 GB 260-pin DDR4 SODIMM modules (32 GB total); no extra cables, brackets or heat spreaders are needed.
Why choose the 32 GB (2 x 16 GB) CL19 kit instead of a lower-capacity or different-speed option?
This kit matches the XT-7315’s qualified DDR4-2666 CL19 2Rx8 spec and fills both slots for maximum supported capacity.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
