Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2666MHz CL19 SODIMM Kit for POSIFLEX XT-7315

SKU CH-ZDYC-4PEQ5

32GB DDR4 2666MHz CL19 SODIMM kit upgrades POSIFLEX XT-7315 with two 16GB modules

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB kit expands POS terminal memory capacity
  • DDR4 2666 speed matches system specification
  • CL19 latency supports stable operation
  • 20 V low-voltage modules reduce power draw
  • 260-pin SODIMM form factor fits POSIFLEX XT-7315

NEMIX RAM 32GB DDR4 2666MHz SODIMM Kit

This 32GB kit contains two 16GB DDR4 2666MHz SODIMM modules built for the POSIFLEX XT-7315 terminal. It runs at 1.2V with CL19 latency and uses 260-pin unbuffered non-ECC memory. Major OEM chips from Samsung, Micron or Hynix deliver reliable operation in point-of-sale environments.

Simple 260-Pin SODIMM Installation

Installation typically takes a few minutes by inserting both modules into the terminal's memory slots. Always consult the owner's manual for detailed instructions specific to the XT-7315. The 2Rx8 rank configuration and 1.20V voltage match the system requirements, reducing the risk of compatibility errors during the upgrade process.

Ideal for POSIFLEX XT-7315 Terminal Upgrades

This kit suits technicians upgrading memory in POSIFLEX XT-7315 JIVA foldable 15 terminals to the full 32GB capacity. It is not for systems requiring ECC registered memory, different voltage levels, or DDR5 modules. Buyers needing higher speeds, lower latencies, or desktop DIMM form factors should look at other memory solutions.

Pontos fortes

  • 32 GB kit expands POS terminal memory capacity
  • DDR4 2666 speed matches system specification
  • CL19 latency supports stable operation
  • 20 V low-voltage modules reduce power draw
  • 260-pin SODIMM form factor fits POSIFLEX XT-7315

Especificações

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT

Perguntas sobre este artigo

How can I verify the kit is running at 2666 MHz CL19 after installing it in the POSIFLEX XT-7315?

Enter the system BIOS or use a tool like CPU-Z; the memory tab should show DDR4-2666 with CAS latency 19 and 1.20 V on both 16 GB modules.

What exactly ships in the box and is anything else required for installation?

The package contains two 16 GB 260-pin DDR4 SODIMM modules (32 GB total); no extra cables, brackets or heat spreaders are needed.

Why choose the 32 GB (2 x 16 GB) CL19 kit instead of a lower-capacity or different-speed option?

This kit matches the XT-7315’s qualified DDR4-2666 CL19 2Rx8 spec and fills both slots for maximum supported capacity.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.