Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Two green DDR5 UDIMM sticks without heat spreaders in a 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5-5600 CL46 1.1V UDIMM Supermicro X13SAE-F memory upgrade

SKU CH-10JQ-SDXDE

A 32 GB DDR5 kit (2×16 GB) at 5600 MT/s, CL46, 1.1 V, 288-pin UDIMM validated for the Supermicro X13SAE-F motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 2X16GB

  • 32 GB capacity in a matched 2 x 16 GB kit for full dual-channel bandwidth
  • DDR5-5600 speed at 1.10 V for efficient high-frequency operation
  • CL46 latency tuned to the Supermicro X13SAE-F memory controller
  • 288-pin UDIMM form factor fits the board's desktop DIMM slots exactly
  • Built with major OEM chips and tested for stability at rated specifications

Targeted DDR5 upgrade kit

This 32 GB kit contains two 16 GB DDR5 UDIMMs built for the Supermicro X13SAE-F motherboard. It is intended for desktop users who need a validated capacity increase on that specific platform.

CL46 timing at 5600 MT/s

The modules run at DDR5 5600 (PC5 44800) with a CAS latency of 46 at 1.1 V. That exact timing and voltage combination is what the board’s memory controller expects for stable operation at rated speed.

Straightforward DIMM installation

The 288 pin unbuffered non ECC sticks seat in the standard desktop slots without extra cables or drivers. Problems usually arise when the manual’s population order is ignored or when a mixing attempt introduces mismatched ranks or voltages.

Põhijooned

  • 32 GB capacity in a matched 2 x 16 GB kit for full dual-channel bandwidth
  • DDR5-5600 speed at 1.10 V for efficient high-frequency operation
  • CL46 latency tuned to the Supermicro X13SAE-F memory controller
  • 288-pin UDIMM form factor fits the board's desktop DIMM slots exactly
  • Built with major OEM chips and tested for stability at rated specifications

Tehnilised andmed

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Will the 5600 MT/s speed run at full rate on the Supermicro X13SAE-F board?

Yes, the kit is spec-matched to the X13SAE-F memory controller so it is recognised at the full DDR5-5600 data rate without manual tuning.

Does the PC5-44800 rating limit bandwidth on this motherboard?

PC5-44800 is the peak transfer rate for DDR5-5600; the X13SAE-F memory controller supports that rate, so the full bandwidth is available.

Will the 288-pin UDIMM modules fit the X13SAE-F DIMM slots?

Yes, the board uses standard 288-pin DDR5 UDIMM slots and the kit matches that exact form factor.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.